[Farmall] transmission gears

[Jim Becker]

Bob,
I don't have a Super C Parts Catalog handy, so I spanned it by looking at 
the C and 2x0 catalogs.  From C to 200, 2 parts show different part numbers: 
front shift rail guide and oil slinger gear.  In both cases, no part 
touching these changed so I assume compatibility.  There are also some 
things you have to watch on the gears.  The 1-2 slider and first driven gear 
changed at model 200 serial 12499.  Book says they interchange, but need to 
be used as pairs.  Also, some tractors had a high speed third gear.  If you 
run into these, the 3-4 slider and third driven gear need to be changed as 
pairs.  High speed third should come with a suffix code "DD" on the serial 
number.

Some parts are common in the 240 as well.  But that gets more complicated, 
so I won't try to cover it.  Ask for specifics if you need them.

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: "Bob Currie" <tractors at foothill.net>
To: <farmall at lists.antique-tractor.com>
Sent: Sunday, November 28, 2004 2:09 PM
Subject: [Farmall] transmission gears


>I have a 51 Farmall Super C with some transmission problems. By talking to 
>you folks six months ago, I learned that getting gears and so forth is 
>nearly impossible, unless it is used stuff from other tractors. Since the 
>Farmall 200 was next in line after the lettered series, would the 
>transmission guts from a 200 be the same parts for the Super C's??
>
> bobcurrie