[AT] OT Ford

[charlie hill]

Go to an Autozone store and they will scan it for free.  

Charlie
----- Original Message ----- 
From: <pga2 at hot1.net>
To: <at at lists.antique-tractor.com>
Sent: Wednesday, March 24, 2004 8:23 AM
Subject: Re: [AT] OT Ford


> I would do that, but I don't have a code reader and I'll be damned
> if I'll pay the dealer's price to do that! I gave up and took it to
> the dealer the last time it was doing this and it cost me $300 to get
> it back. It WAS fixed, but that's just too much money now with my
> current situation.
> 
> Phil
> 
> > Dump the codes from the computer. That may give you a clue.
> >
> > I always check for the obvoius mechanical problems and then go
> > straight to the computer. Many times it will give you a clue.
> >
> > Phil Auten wrote:
> >> Jerry,
> >> I have a similar problem with my '91. It's fuel injected and
> >> computerized. It will run rough, with an intermittent
> >> miss while running down the road at pretty much any speed under 65
> >> mph,  but only while "cruising", that is
> >> not accelerating or decelerating. A little more throttle and it
> >> smooths  out. Same thing for a little less throttle.
> >> I suspect a vacuum leak somewhere, I just haven't found it yet.
> >>
> >> Phil
> 
> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>