[AT] Super M

Richard Fink Sr nancydick at keyconn.net
Sat Mar 13 03:42:52 PST 2004


DudleyI don't know direction the nut should turn but i would say. the same 
direction that the shaft turns. That way it would not be able to turn loose 
when operating.
R Fink
PA



At 11:48 PM 03/12/2004 -0800, you wrote:
>By chance does anyone know/remember which way you turn the water pump
>packing Nut/Gland on the Farmall M water pump in order to back it off the
>pump?
>I've removed the pump from the tractor and the fan from the pump.  According
>to the Service Manual the next step in the disassembly is to remove this
>packing Nut/Gland which is approximately 1.25" in diamater (it is circular
>and not a hexagon as a nut would be and the top side looks similar to a
>castle nut).  Unfortunately, however, the Manual doesn't say anything about
>the threads.  I was in the local Case-IH dealer today picking up a seal,
>packing and gaskets and a couple of the guys there (a parts guy and a
>mechanic) thought the pump might have reverse threads but it had been too
>long since they had worked on one so they weren't sure.  I had put alot of
>CCW torque on the nut/gland with no success - of course I may have only been
>tightening it.
>Thanks for any input -
>Dudley
>Snohomish, Washington
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list