[AT] Yesterday was a good tractor Day

[DAVIESW739 at aol.com]

LeRoy, sometimes when a mag sits for a while the  contacts on the coil get 
corroded, its pretty simple to remove and then clean it  up. Use Silicon grease 
to cover the contact points when reassembling you can get  the grease at Radio 
shack or any electronics place. Be sure to clean all parts  that make contact 
especially the metal parts of the coil these have to make a  good ground for 
it to work. Some mags have brass contacts other are steel to  steel or 
aluminum, you just have take it apart and look to see what needs  cleaning.  I have 
taken mags that had no output at all and cleaned them and  they worked perfect. 

Walt Davies
Cooper Hollow Farm
Monmouth, OR  97361
503 623-0460