[Farmall] New Idea grader blade

craiger.mon at verizon.net craiger.mon at verizon.net
Tue Jun 22 05:52:46 PDT 2004


Thanks for the info.

Craig


> 
> From: szabelsk at gdls.com
> Date: 2004/06/22 Tue AM 05:50:21 EST
> To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
> Subject: Re: [Farmall] New Idea grader blade
> 
> 
> 1/4 inch should work. I would suggest that you size the piece so that the
> bolt holes are centered on it. That way you can reverse it when it wears
> down without affecting anything.
> 
> Carl Szabelski
> 
> 
> 
>                                                                                                                                               
>                     <craiger.mon at verizon.net>                                                                                                 
>                     Sent by:                              To:     <farmall at lists.antique-tractor.com>                                         
>                     farmall-bounces at lists.antique-t       cc:                                                                                 
>                     ractor.com                            Subject:     [Farmall] New Idea grader blade                                        
>                                                                                                                                               
>                                                                                                                                               
>                     06/21/2004 08:42 AM                                                                                                       
>                     Please respond to Farmall/IHC                                                                                             
>                     mailing list                                                                                                              
>                                                                                                                                               
>                                                                                                                                               
> 
> 
> 
> 
> Hi,
> 
> I'm working on renovating an old grader blade that fits on the front of a
> New-Idea Horn #50 loader. The only thing that I seem to be missing at this
> time is the cutting edge that bolts onto the bottom of the blade. If I were
> to get a piece of flat hardened steel and drill bolt holes to matcht the
> blade, would this work? What size steel should I use...I was thinking 1/4"
> thick by 6" tall. Anyone have any answers/suggestions?
> 
> Thanks for your help.
> 
> Craig
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 
> 
> 
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 




More information about the AT mailing list