Now Plow for...RE: [AT] IH cub

[Mark Greer]

Here are a couple of links showing some use plow parts.
http://www.tm-tractor.com/immp/immp_001.htm
http://www.tm-tractor.com/immp/immp_002.htm
here is a left trip lever
http://www.tm-tractor.com/immp/7822_001.htm


----- Original Message ----- 
From: "Michael P. Maynard" <mmaynard at rochester.rr.com>
To: "'Antique tractor email discussion group'"
<at at lists.antique-tractor.com>
Sent: Wednesday, June 16, 2004 8:00 AM
Subject: Now Plow for...RE: [AT] IH cub


> Mark, I have the bracket... but you cant have it... :-P  I could
> probably take some detaild pics of it so that you could make one.  I am
> looking for the latch bars that hold the plows up allowing to switch
> sides.  Got any spares?  Maybe you could make up some drawings for me?
>
> Mike
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Cecil E
> Monson
> Sent: Wednesday, June 16, 2004 7:14 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] IH cub
>
> > While we're on the subject of Cubs I need some help with mine. It came
> with
> > a pair or moldboard plows-one that throws to the right and one that
> throws
> > left. There is a small 2 piece bracket that goes on the lift arm which
> I am
> > missing. It has special notches for a chain attached to each plow to
> hook
> > into. You can plow a furrow with one plow and turn around at the end
> of the
> > furrow and use the other plow to come right back up the furrow you
> just came
> > down. I'd like to get this setup completely operational with the
> correct
> > parts as it has a cobbled piece on it now that works but looks like
> crap.
> > This two plow setup is real handy for plowing gardens and from what
> I've
> > seen at the tractor shows it isn't all that common. Anyone out there
> ever
> > seen a setup like mine and does anyone have the brackets I'm looking
> for?
> > Mark Greer
> > Orrville, Ohio
>
>
>
> Mark, if you don't have any luck on this List, go to the Farmall
> Cub Bulletin Board and post your question as a "new message". If you are
> to find these brackets this would be your best bet.  Any answers to your
> post will come directly to you in email and you can also read your
> thread
> on the web site.
>
> http://www.atis.net/cgi-bin/FarmallCub.pl
>
> Good luck, Cecil
>
> -- 
> The nicest thing about telling the truth is you never have to wonder
> what you said.
>
> Cecil E Monson
> Lucille Hand-Monson
> Mountainville, New York   Just a little east of the North Pole
>
> Allis Chalmers tractors and equipment
>
> Free advice
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> _____________________________________________________
> This message scanned for viruses by CoreComm
>