[AJD] Syracuse Plow Points?

LeRoy Price lep at epix.net
Tue Jun 8 11:15:58 PDT 2004


Darn, I ment 1442F.  Anything for that?

I need to get one of those books.  The info on the DS and DDS helps.

LeRoy

> 
> From: Bruce Mahr <martian at winco.net>
> Date: 2004/06/08 Tue PM 01:38:03 EDT
> To: Antique John Deere mailing list <antique-johndeere at lists.antique-tractor.com>
> Subject: Re: [AJD] Syracuse Plow Points?
> 
> LeRoy: 1442E doesn't show up in the PC158 Plow Bottoms parts book. The
> shares, or points as you call them, use the 1442 base number but have
> different prefixes in front of the number for the different size and types
> of shares.
> DS is a deep suck share and DDS is a double-deep suck share. So they would
> not be a matched set for a 52 plow.
> Hope this helps!
> 
> Bruce Mahr
> 
> ----- Original Message ----- 
> From: "LeRoy Price" <lep at epix.net>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Sunday, June 06, 2004 3:34 PM
> Subject: [AJD] Syracuse Plow Points?
> 
> 
> >
> > I found someone with a couple Syracuse plow points for a
> > 1442E that are in good condition.  On the point it has says
> > DS, the other, DDS.  Both are 12 inches across the front
> > cutting edge where the one I have on mine are 15 inches.
> > Are the DS and DDS a matched set for a Model 52 plow with
> > 12 inch Syracuse moldboards that say 1442E on the back?
> > What other points would fit this?
> >
> > LeRoy
> >
> > Incompetence: When you earnestly believe you can compensate for lack of
> skill by doubling your efforts, there's no end to what you can't do.
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> 
> 
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 

Incompetence: When you earnestly believe you can compensate for lack of skill by doubling your efforts, there's no end to what you can't do.




More information about the AT mailing list