[Farmall] Super C transmisson

[E. John Puckett]

Bob, for used gears you might try www.jptractorsalvage.com or 
www.chowntractroparts.com

Bob Currie wrote:
> Thank you for the information. A couple of guys emailed off the list 
> with pretty much the same information, but nobody was brave enough to 
> mention 460 bucks for the one gear I'll probably need. I believe I'll 
> just put a sad look on my face, take the parts book in hand, and humbly 
> go to a couple of local parts houses and IH dealers to see what they 
> have in stock.
> 
> bobcurrie
> 
> 
>> Bob,
>> I haven't worked on one of them, but since I haven't seen an answer from
>> anyone that has I'll give you my best guess.
>>
>> IH provided various gasket and seal kits.  The closest reference I have
>> handy is for the 200.  It lists a kit for the chassis, which if still
>> available includes stuff you are not planning to work on.  Chances are 
>> the
>> kit is no longer available but the individual gaskets and seals are.
>> Bearings are probably available too.  Once you have them out, you can
>> probably get bearings and seals from a local bearing house.  This will
>> usually save money.  A bearing house can probably cross reference the IH
>> part numbers and get replacements for most before you take it apart.
>>
>> Gears are probably all available from CaseIH but breathtakingly 
>> expensive.
>> I just looked on casetractorparts.com and found the 3-4 slider (for 
>> the 200,
>> probably the same) was $460.  The famous oil slinger gear is half 
>> that.  You
>> may be able to get a price break (HA) from a local dealer.  Probably no
>> other sources for gears other than used ones.
>>
>> Jim Becker        jim.becker at verizon.net
>>
>> ----- Original Message -----
>> From: "Bob Currie" <tractors at foothill.net>
>> To: <farmall at lists.antique-tractor.com>
>> Sent: Monday, July 12, 2004 8:44 PM
>> Subject: [Farmall] Super C transmisson
>>
>>
>> >
>> > >Since I don't deal with the styled Farmalls much, I'm not up on 
>> some of
>> > >the best parts resources our there. I'm planning to start on the 
>> project
>> > >to get the whinny, grindy transmission overhauled on the 51 Super 
>> C.  I'd
>> > >appreciate recommendations on parts sources for transmission stuff. Do
>> > >they make an overhaul kit with all the bushing, bearing, gaskets
>> > >etc?   Are gears available? I know I'm gonna need at least one of
>> > >those.  The only place I was thinking of might be Carter &
>> > >Gruenwald  there in Brooklyn, WI. Are there other sources?
>> > >
>> > >bobcurrie
>>
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
> 
> 

-- 
John
another one of them
*.?-!.* cub owners