[AT] Allis Chalmers B-1 lawn tractor

[Gilbert Schwartz]

Charlie; I'm sure you're right. It just seemed strange that Wendel didn't
even mention the B-1, even when he listed a whole bunch of the other B
numbers. I really think there's quite a few errors/omissions in the books,
after all, Allis has been gone for a bunch of years and it seems they, as a
company, weren't too dedicated to record keeping. I know there's no mention
of an Allis Chalmers off road, industrial/construction dirt/rock hauler
truck comparable to the TEREX, but I know  where there is one. I think it's
just people like us who just keep running into such things.
    I also know that I have a 7 h.p., 21inch, walk behind lawn mower, I know
what it pulls like, and a 17 h.p. 42inch, ha. That 17 wouldn't begin to pull
a 60 inch. At least it wouldn't cutting anything. I guess it's just a matter
of  machines being different. Gil
----- Original Message ----- 
From: "charlie hill" <chill8 at cox.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Sunday, July 11, 2004 8:29 PM
Subject: Re: [AT] Allis Chalmers B-1 lawn tractor


> Gil,  the B 10 came after the B 1 according to Swinford.  I'm pretty sure
> that is right.  I just never saw a 7 1/4 hp Briggs.  7's yes, 7 1/2 yes
but
> the 7 1/4 struck me as strange.
>
> I have Wendels book and all of Swinfords AC books.  Swinford is generally
> more accurate as far as I can tell.  That is not to kick Mr. Wendel.  His
> book has been a good source of information too.
>
> Charlie
> ----- Original Message ----- 
> From: "Gilbert Schwartz" <gschwartz1 at mchsi.com>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Sunday, July 11, 2004 1:30 PM
> Subject: Re: [AT] Allis Chalmers B-1 lawn tractor
>
>
> > Charlie; I'm with you on that horsepower being a misprint. 3 spindle, 60
> > inch just don't fit with 7 1/4 hp, at any speed.
> > C.H. Wendel says the AC B10 was the earliest, built through 1968 and it
> used
> > a 9 h.p. B&S. Wendel's book also pictures one of the B10's working  with
a
> > 32 inch roto-tiller. That too sounds like a mighty big load for a 9 h.p.
> > engine, especially if the tiller is in the dirt.
> > Maybe the h.p. ratings are different now than in the 60's. Gil
> > ----- Original Message ----- 
> > From: "Cecil E Monson" <cmonson at hvc.rr.com>
> > To: "Antique tractor email discussion group"
> <at at lists.antique-tractor.com>
> > Sent: Saturday, July 10, 2004 10:46 AM
> > Subject: Re: [AT] Allis Chalmers B-1 lawn tractor
> >
> >
> > > > Cecil,  according to what I can find the B-1 SHOULD have a 7 1/4 hp
> > Briggs
> > > > and a 3 speed transmission with speeds of 2, 3.75 and 6 mph.  It had
> an
> > > > optional 50%  underdriven low speed drive.  Implements available
were:
> > 42
> > > > inch rotary mower,  60 inch 3 gang mower, 10 inch moldboard plow,
> > > > cultivator, disk harrow, 42 inch dozer blade, 42 inch center mount
> > grader
> > > > blade, 32 inch tiller, snow thrower, and a sicklebar mower.  It was
> made
> > by
> > > > Simplicity.
> > > >
> > > > Charlie
> > >
> > >
> > > Thanks, Charlie. I will know more tomorrow but at least I will have
> > > a good idea what I should be looking for. I'm sure I will have more to
> say
> > > about this tomorrow.
> > >
> > > Cecil
> > > -- 
> > > The nicest thing about telling the truth is you never have to wonder
> > > what you said.
> > >
> > > Cecil E Monson
> > > Lucille Hand-Monson
> > > Mountainville, New York   Just a little east of the North Pole
> > >
> > > Allis Chalmers tractors and equipment
> > >
> > > Free advice
> > >
> > > _______________________________________________
> > > AT mailing list
> > > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at