[AJD] Valve

[Duane Larson]

Paul,
I agree - that is why I looked in my newest Master Parts Index (1975) and it
wasn't there - so must have been after that.  I thought perhaps there was a
time at which JD made big changes in their parts numbers in the last few
years, and Greg would have been aware of that.

Any plans for another GP rally?
Merry Christmas from the new Grandpa
Duane

----- Original Message ----- 
From: "Paul O" <mrgp at fwi.com>
To: "Antique John Deere mailing list"
<antique-johndeere at lists.antique-tractor.com>
Sent: Wednesday, December 15, 2004 1:24 PM
Subject: Re: [AJD] Valve


> Duane
> Mikes' theory is that the part (number) change was made after the master
> parts books we have were printed. I just checked Reparr catalog 50-R for
> AC1147. It shows that number is for 2 C1012R  valves. This book is dated
> 1940.
> Paul O
>
> ----- Original Message ----- 
> From: "Duane Larson" <jdlarson at comcast.net>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Wednesday, December 15, 2004 11:20 AM
> Subject: Re: [AJD] Valve
>
>
> > Greg,
> > OK, if I put in part number AC1147R for the GP valves, I get the C2615R
as
> > a
> > replacement.  But I still wonder if there is a way to see when a change
in
> > part number was made.
> > Duane
> >
> > ----- Original Message ----- 
> > From: <greg at theoldtractorcompany.com>
> > To: "Antique John Deere mailing list"
> > <antique-johndeere at lists.antique-tractor.com>
> > Sent: Wednesday, December 15, 2004 10:26 AM
> > Subject: RE: [AJD] Valve
> >
> >
> >> As Lou said, D valves are over $100. When I started in this biz, the D
> > valves were an outrageous $24. We like to died!
> >> Years ago I was redoing the head for my Waterloo Boy (which by the way
is
> > rumored to be getting its pistons made this winter) in the naive hope
that
> > someday I might actually get it together and after installing new
guides,
> > new valves,new springs, new caps, new keepers and decking the head I
> > nearly
> > fell over at what I had invested in just the head. When I complained
about
> > this to my friend his response was "When you are restoring a Waterloo
Boy,
> > you don't ask or complain". True words
> >>
> >> Speaking of the WB, any one have any leads on any spare parts at all?
It
> > is an early one, 1915. Might save me having to have something made.
> >>
> >> Greg
> >>
> >>
> >> Greg Stephen
> >> The Old Tractor Company
> >> Stephen Equipment Company
> >> Box 709
> >> 7460 E Hiway 86
> >> Franktown, CO 80116
> >> 303-663-5246
> >> 303-468-0377 FAX<<--A GREAT WAY TO REACH ME!
> >>
> >>
> >> ------------------------------------------------
> >> On Tue, 14 Dec 2004 22:42:28 -0800, "Dean VP" <deanvp at att.net> wrote:
> >>
> >> > Greg:
> >> >
> >> > WALA, we have a winner. I knew you would come through. Now, please
tell
> > us
> >> > why this part number doesn't show up in the documentation?
> >> >
> >> > I suspect the parts sellers might think it's good that 4 of these
> > expensive
> >> > valves are required but I think we collectors might have a different
> >> > opinion!  :-)
> >> >
> >> > Dean A. Van Peursem
> >> > Snohomish, WA 98290
> >> >
> >> > I'm a walking storeroom of facts..... I've just lost the key to the
> >> > storeroom door
> >> >
> >> >
> >> > www.deerelegacy.com
> >> >
> >> > http://members.cox.net/classicweb/email.htm
> >> >
> >> >
> >> >
> >> > -----Original Message-----
> >> > From: antique-johndeere-bounces at lists.antique-tractor.com
> >> > [mailto:antique-johndeere-bounces at lists.antique-tractor.com] On
Behalf
> > Of
> >> > greg at theoldtractorcompany.com
> >> > Sent: Tuesday, December 14, 2004 9:36 PM
> >> > To: Antique John Deere mailing list
> >> > Subject: Re: [AJD] Valve
> >> >
> >> > GP engine valve, both exhaust and intake
> >> > No matter what the price is, the good thing is it take FOUR!!!!!
> >> > Doh!
> >> > Greg
> >> >
> >> >
> >> >
> >> > Greg Stephen
> >> > The Old Tractor Company
> >> > Stephen Equipment Company
> >> > Box 709
> >> > 7460 E Hiway 86
> >> > Franktown, CO 80116
> >> > 303-663-5246
> >> > 303-468-0377 FAX<<--A GREAT WAY TO REACH ME!
> >> >
> >> >
> >> > ------------------------------------------------
> >> > On Tue, 14 Dec 2004 19:41:57 -0800, "John Paur"
> > <johnjanpaur at directcon.net>
> >> > wrote:
> >> >
> >> > > Dean,  The part # C2615R is embossed on the valve. It's a new
valve,
> >> > > probably a crossover number to an orignal part number.  Also it
says
> >> > EATON,
> >> > > JD and EXHAUST.  The valve is 2.5 in. diameter and the stem is 8+
in.
> >> > long.
> >> > > I guess parts must be a bit cheaper in Oregon than in California.
In
> > any
> >> > > case, it's d@&# expensive!!   John
> >> > >
> >> > > ----- Original Message -----
> >> > > From: "Dean VP" <deanvp at att.net>
> >> > > To: "'Antique John Deere mailing list'"
> >> > > <antique-johndeere at lists.antique-tractor.com>
> >> > > Sent: Tuesday, December 14, 2004 6:38 PM
> >> > > Subject: RE: [AJD] Valve
> >> > >
> >> > >
> >> > > > John:
> >> > > >
> >> > > > Could you verify that part number? I checked in the PC's for the
D,
> > GP &
> >> > G
> >> > > > and didn't come up with that # for exhaust valves. But I also
> > checked
> >> > > > JDParts and my system does come up with a valid Exhaust Valve
part
> >> > number
> >> > > > but only for $85 not $97???
> >> > > >
> >> > > > Dean A. Van Peursem
> >> > > > Snohomish, WA 98290
> >> > > >
> >> > > > I'm a walking storeroom of facts..... I've just lost the key to
the
> >> > > > storeroom door
> >> > > >
> >> > > >
> >> > > > www.deerelegacy.com
> >> > > >
> >> > > > http://members.cox.net/classicweb/email.htm
> >> > > >
> >> > > >
> >> > > >
> >> > > > -----Original Message-----
> >> > > > From: antique-johndeere-bounces at lists.antique-tractor.com
> >> > > > [mailto:antique-johndeere-bounces at lists.antique-tractor.com] On
> > Behalf
> >> > Of
> >> > > > John Paur
> >> > > > Sent: Tuesday, December 14, 2004 5:38 PM
> >> > > > To: Antique John Deere mailing list
> >> > > > Subject: [AJD] Valve
> >> > > >
> >> > > > Someone with a D, GP or G parts catalog - I have a new exhaust
> >> > > > valve
> > #
> >> > > > C2615R.  It is listed on the JD parts web page at $97.  WOW!!!!!
> > What
> >> > > does
> >> > > > it fit?  John
> >> > > >
> >> > > >
> >> > > > _______________________________________________
> >> > > > Antique-johndeere mailing list
> >> > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >> > > >
> >> > > >
> >> > > > _______________________________________________
> >> > > > Antique-johndeere mailing list
> >> > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >> > > >
> >> > >
> >> > >
> >> > > _______________________________________________
> >> > > Antique-johndeere mailing list
> >> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >> > >
> >> > _______________________________________________
> >> > Antique-johndeere mailing list
> >> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >> >
> >> >
> >> >
> >> > _______________________________________________
> >> > Antique-johndeere mailing list
> >> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >> >
> >> _______________________________________________
> >> Antique-johndeere mailing list
> >> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
> > _______________________________________________
> > Antique-johndeere mailing list
> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> >
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere