[AJD] Valve

Paul O mrgp at fwi.com
Wed Dec 15 10:24:40 PST 2004


Duane
Mikes' theory is that the part (number) change was made after the master 
parts books we have were printed. I just checked Reparr catalog 50-R for 
AC1147. It shows that number is for 2 C1012R  valves. This book is dated 
1940.
Paul O

----- Original Message ----- 
From: "Duane Larson" <jdlarson at comcast.net>
To: "Antique John Deere mailing list" 
<antique-johndeere at lists.antique-tractor.com>
Sent: Wednesday, December 15, 2004 11:20 AM
Subject: Re: [AJD] Valve


> Greg,
> OK, if I put in part number AC1147R for the GP valves, I get the C2615R as 
> a
> replacement.  But I still wonder if there is a way to see when a change in
> part number was made.
> Duane
>
> ----- Original Message ----- 
> From: <greg at theoldtractorcompany.com>
> To: "Antique John Deere mailing list"
> <antique-johndeere at lists.antique-tractor.com>
> Sent: Wednesday, December 15, 2004 10:26 AM
> Subject: RE: [AJD] Valve
>
>
>> As Lou said, D valves are over $100. When I started in this biz, the D
> valves were an outrageous $24. We like to died!
>> Years ago I was redoing the head for my Waterloo Boy (which by the way is
> rumored to be getting its pistons made this winter) in the naive hope that
> someday I might actually get it together and after installing new guides,
> new valves,new springs, new caps, new keepers and decking the head I 
> nearly
> fell over at what I had invested in just the head. When I complained about
> this to my friend his response was "When you are restoring a Waterloo Boy,
> you don't ask or complain". True words
>>
>> Speaking of the WB, any one have any leads on any spare parts at all? It
> is an early one, 1915. Might save me having to have something made.
>>
>> Greg
>>
>>
>> Greg Stephen
>> The Old Tractor Company
>> Stephen Equipment Company
>> Box 709
>> 7460 E Hiway 86
>> Franktown, CO 80116
>> 303-663-5246
>> 303-468-0377 FAX<<--A GREAT WAY TO REACH ME!
>>
>>
>> ------------------------------------------------
>> On Tue, 14 Dec 2004 22:42:28 -0800, "Dean VP" <deanvp at att.net> wrote:
>>
>> > Greg:
>> >
>> > WALA, we have a winner. I knew you would come through. Now, please tell
> us
>> > why this part number doesn't show up in the documentation?
>> >
>> > I suspect the parts sellers might think it's good that 4 of these
> expensive
>> > valves are required but I think we collectors might have a different
>> > opinion!  :-)
>> >
>> > Dean A. Van Peursem
>> > Snohomish, WA 98290
>> >
>> > I'm a walking storeroom of facts..... I've just lost the key to the
>> > storeroom door
>> >
>> >
>> > www.deerelegacy.com
>> >
>> > http://members.cox.net/classicweb/email.htm
>> >
>> >
>> >
>> > -----Original Message-----
>> > From: antique-johndeere-bounces at lists.antique-tractor.com
>> > [mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf
> Of
>> > greg at theoldtractorcompany.com
>> > Sent: Tuesday, December 14, 2004 9:36 PM
>> > To: Antique John Deere mailing list
>> > Subject: Re: [AJD] Valve
>> >
>> > GP engine valve, both exhaust and intake
>> > No matter what the price is, the good thing is it take FOUR!!!!!
>> > Doh!
>> > Greg
>> >
>> >
>> >
>> > Greg Stephen
>> > The Old Tractor Company
>> > Stephen Equipment Company
>> > Box 709
>> > 7460 E Hiway 86
>> > Franktown, CO 80116
>> > 303-663-5246
>> > 303-468-0377 FAX<<--A GREAT WAY TO REACH ME!
>> >
>> >
>> > ------------------------------------------------
>> > On Tue, 14 Dec 2004 19:41:57 -0800, "John Paur"
> <johnjanpaur at directcon.net>
>> > wrote:
>> >
>> > > Dean,  The part # C2615R is embossed on the valve. It's a new valve,
>> > > probably a crossover number to an orignal part number.  Also it says
>> > EATON,
>> > > JD and EXHAUST.  The valve is 2.5 in. diameter and the stem is 8+ in.
>> > long.
>> > > I guess parts must be a bit cheaper in Oregon than in California.  In
> any
>> > > case, it's d@&# expensive!!   John
>> > >
>> > > ----- Original Message -----
>> > > From: "Dean VP" <deanvp at att.net>
>> > > To: "'Antique John Deere mailing list'"
>> > > <antique-johndeere at lists.antique-tractor.com>
>> > > Sent: Tuesday, December 14, 2004 6:38 PM
>> > > Subject: RE: [AJD] Valve
>> > >
>> > >
>> > > > John:
>> > > >
>> > > > Could you verify that part number? I checked in the PC's for the D,
> GP &
>> > G
>> > > > and didn't come up with that # for exhaust valves. But I also
> checked
>> > > > JDParts and my system does come up with a valid Exhaust Valve part
>> > number
>> > > > but only for $85 not $97???
>> > > >
>> > > > Dean A. Van Peursem
>> > > > Snohomish, WA 98290
>> > > >
>> > > > I'm a walking storeroom of facts..... I've just lost the key to the
>> > > > storeroom door
>> > > >
>> > > >
>> > > > www.deerelegacy.com
>> > > >
>> > > > http://members.cox.net/classicweb/email.htm
>> > > >
>> > > >
>> > > >
>> > > > -----Original Message-----
>> > > > From: antique-johndeere-bounces at lists.antique-tractor.com
>> > > > [mailto:antique-johndeere-bounces at lists.antique-tractor.com] On
> Behalf
>> > Of
>> > > > John Paur
>> > > > Sent: Tuesday, December 14, 2004 5:38 PM
>> > > > To: Antique John Deere mailing list
>> > > > Subject: [AJD] Valve
>> > > >
>> > > > Someone with a D, GP or G parts catalog - I have a new exhaust 
>> > > > valve
> #
>> > > > C2615R.  It is listed on the JD parts web page at $97.  WOW!!!!!
> What
>> > > does
>> > > > it fit?  John
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > Antique-johndeere mailing list
>> > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> > > >
>> > > >
>> > > > _______________________________________________
>> > > > Antique-johndeere mailing list
>> > > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> > > >
>> > >
>> > >
>> > > _______________________________________________
>> > > Antique-johndeere mailing list
>> > > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> > >
>> > _______________________________________________
>> > Antique-johndeere mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> >
>> >
>> >
>> > _______________________________________________
>> > Antique-johndeere mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>> >
>> _______________________________________________
>> Antique-johndeere mailing list
>> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
> _______________________________________________
> Antique-johndeere mailing list
> http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
> 




More information about the AT mailing list