[Ford-ferguson] CHANGING POINTS ON A FRONT MOUNT

[Chris Britton]

Dick is right on.  There are two bolts holding the front mount distribuitor
on.. and it only goes back in ONE way..

points gap is .015 of r the front mount.. .014 - .016 is fine.

pointsgap for the sidemount is .025.. some people ue the +/- .001 spread as
well.

Fireing order is 1-2-4-3 CCW.. watch the numbering on that front mount
cap... use champion h12 or al437 spark plugs and real copper wires.

Soundguy


>Hey you guys want to change points and condenser on front mounted
>distributors the right way?
>unsnap cover - remove coil - disconnect primary wire - remove the two cap
>screws and remove the whole distributor and take to workbench - IT FO4
>manual show procedure to check timing if you want check but not
>necessary. The drive tang is offset and will only go in one way. So when