[AT] Allis Chalmers wheel disk

[charlie hill]

More about the CA.  It was basically a pumped up C.  It was a little tractor
but it has a lot of guts and the same engine as the D 10, D-12 and D-14.

Charlie
----- Original Message ----- 
From: "Al Jones" <aljones at ncfreedom.net>
To: "'Antique tractor email discussion group'"
<at at lists.antique-tractor.com>
Sent: Sunday, August 15, 2004 12:35 PM
Subject: RE: [AT] Allis Chalmers wheel disk


> Wow, Charlie I didn't realize a CA had that much HP, I was thinking it
> was just a tricycle-front B.  Anyway I will try to stop this week and
> take a closer look.  I have been sorta holding out for an IH disk or a
> nice King, but no luck so far.  Then again with all the other stuff on
> the horizon, I don't need to be buying any more old iron anyway! :)
>
> Al
>
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
> Sent: Sunday, August 15, 2004 10:05 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Allis Chalmers wheel disk
>
> Al if it is about 8-10 feet wide it was one designed for a CA Allis. I
> think
> it would be 9 1/2 feet wide.  It is designed to work with the 'traction
> booster" system (draft control) on the Allis tractors.   That doesn't
> mean
> it wouldn't work behind your 450.  It probably would.
>
> The 12 foot one in the picture was built for a WD-45 to pull.
>
> If you decide you don't want it let me know I might be interested in it
> myself.
>
> Charlie
>
> ----- Original Message ----- 
> From: "Al Jones" <aljones at ncfreedom.net>
> To: "Antique-Tractor" <at at lists.antique-tractor.com>
> Sent: Saturday, August 14, 2004 9:52 PM
> Subject: [AT] Allis Chalmers wheel disk
>
>
> > Anyone know anything about AC's wheel disks? The local MF dealer has
> had
> > one on the yard for quite a while, it looks like it might be a nice
> > match for my 450 even though it's not red.  Haven't had any luck
> finding
> > an IH #37.  The disk looks to be about 8-10 wide.  I found a 12 footer
> > on the YT photo ad's that looks similar in construction:
> >
> >
> >
> http://www.tractorshed.com/cgi-bin/photoads/classifieds.cgi?search_and_d
> > isplay_db_button=on
> >
> <http://www.tractorshed.com/cgi-bin/photoads/classifieds.cgi?search_and_
> > display_db_button=on&db_id=76952&query=retrieval>
> > &db_id=76952&query=retrieval
> >
> > Can you still get parts for these?  I have no idea of the model but
> the
> > gang parts (bearings, hangers, etc.) remind me of the mounted AC disk
> my
> > great-uncle has for his WD-45.  I have been thinking if it's not an
> > "orphan" I might stop in sometime and inquire.
> >
> > Thanks,
> > Al
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at