<div dir="auto">Make sure to run your trunk line at a downhill angle away from your compressor and a bleeder valve at the end to drain condensation water. Also take all your drops from the top and go up a little to keep any condensed water from your tool lines.<div dir="auto"><br></div><div dir="auto">Dave</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Sep 11, 2021, 12:29 AM Dennis Johnson <<a href="mailto:moscowengnr@outlook.com">moscowengnr@outlook.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">I have used rubber hose for the long runs, and then used black pipe for drops. I welded a flat tab on the black pipe so I could screw it to the wall studs with lag bolts.<br>
<br>
Sent from my iPad<br>
<br>
> On Sep 10, 2021, at 8:43 PM, Spencer Yost <<a href="mailto:spencer@rdfarms.com" target="_blank" rel="noreferrer">spencer@rdfarms.com</a>> wrote:<br>
> <br>
> So I’m going to be making three new pipe runs from my air compressor.  Previously I’ve just relied on hoses since the 50 foot hose will reach everywhere in my shop.<br>
> <br>
> It will consist of one long “trunk” run that will be nearly 40 feet, and then a few stub runs of anywhere from 5’ to 15’ <br>
> <br>
> I was thinking about black pipe as that’s what I have used before. But I had no idea the common, affordable black pipe you find in hardware stores is only good to 150 psi. My compressor is two stage and is 175 psi:<br>
> <br>
> 3/4-in x 3-ft 150-PSI Black Iron Pipe <a href="https://www.lowes.com/pd/Southland-Pipe-3-4-in-x-3-ft-150-PSI-Black-Iron-Pipe/3371442" rel="noreferrer noreferrer" target="_blank">https://www.lowes.com/pd/Southland-Pipe-3-4-in-x-3-ft-150-PSI-Black-Iron-Pipe/3371442</a><br>
> <br>
> I guess I’m thinking about biting the bullet and going copper. I’d like to go with some of those really neat new aluminum systems but I could never afford that.<br>
> <br>
> What are y’all think about copper? I know 3/4” copper is good to about 1000 psi.   It eliminates  the rust problem that eventually befalls all black steel pipe systems; which is kind of a plus.  As far as installation, I solder better than I cut threads :-)<br>
> <br>
> <br>
> <br>
> Spencer<br>
> <br>
> <br>
> Sent from my iPhone<br>
> _______________________________________________<br>
> AT mailing list<br>
> <a href="mailto:AT@lists.antique-tractor.com" target="_blank" rel="noreferrer">AT@lists.antique-tractor.com</a><br>
> <a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank" rel="noreferrer">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</blockquote></div>