<div style="color:black;font: 12pt Arial, Helvetica, sans-serif;">John, list members,
<div>A tangent to this conversation, something I inherited from my father... not sure if it is a superstition or has some validity..??? but I just try to never change the brand of the oil in my autos and tractors.  I can remember us buying an used 1950 Buick way back when, my Dad asked what brand of oil was in it, ..Quaker State, and that was what we used, anyway, too bad that your Exxon oil became hard to find.  Just curious if any list members also hate to change brands of oil?   It doesn't apply here, but for sure I have seen leakage and usage in situations where there was a switch to synthetic oil.  </div>

<div><br>
</div>

<div>John in Ferndale<br>
<br>
<br>

<div style="font-family:helvetica,arial;font-size:10pt;color:black">-----Original Message-----<br>
From: John Hall <jtchall@nc.rr.com><br>
To: Antique tractor email discussion group <at@lists.antique-tractor.com><br>
Sent: Sat, Aug 15, 2020 9:57 am<br>
Subject: [AT] Engine oil<br>
<br>

<div dir="ltr">What this group needs (in my opinion) is a good farm equipment discussion.<br>
</div>

<div dir="ltr">Engine Oil--but wait, this isn't your ordinary oil discussion!!! Long <br>
</div>

<div dir="ltr">story short, I have a fleet of old gas powered working FARM <br>
</div>

<div dir="ltr">equipment--not talking about lawn equipment. We have always ran big name <br>
</div>

<div dir="ltr">brand oil. I switched from Exxon Super HDII about 3-4 years ago because <br>
</div>

<div dir="ltr">it was getting really hard to source. I switched over to Chevron Dello <br>
</div>

<div dir="ltr">400 (both are 30W). The Dello is formulated for diesels, but supposedly <br>
</div>

<div dir="ltr">works in older gas engines. I now have 2 engines that drink oil when <br>
</div>

<div dir="ltr">being worked hard. My Farmall M can drop 2-3 qts in a couple hours of <br>
</div>

<div dir="ltr">pulling a cultimulcher--yet you don't really notice it smoking. It does <br>
</div>

<div dir="ltr">foul plugs. That work is a very heavy load. Also I have a 3300 Deere <br>
</div>

<div dir="ltr">combine that will drop a qt or so every truckload of corn. Now I've only <br>
</div>

<div dir="ltr">had this combine about 8 years and the oil consumption just started <br>
</div>

<div dir="ltr">about 3 years ago--I swear some days it is worse than others. I really <br>
</div>

<div dir="ltr">wonder if its the oil I'm using. I have on hand some CaseIH low-ash oil <br>
</div>

<div dir="ltr">I run in lawnmowers--considering putting it in the combine for this <br>
</div>

<div dir="ltr">fall. Supposedly the same stuff IH has been selling for 40+ years. The <br>
</div>

<div dir="ltr">cost is about $3-4 more a quart, so an extra $25 to change oil. For the <br>
</div>

<div dir="ltr">record, the rest of the gas powered fleet doesn't run hard/long enough <br>
</div>

<div dir="ltr">to notice a problem. The combine is such a gas hog, can't help but <br>
</div>

<div dir="ltr">wonder if its a fuel issue causing dilution.<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">What you guys think, worth a shot?<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">John Hall<br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr"><br>
</div>

<div dir="ltr">_______________________________________________<br>
</div>

<div dir="ltr">AT mailing list<br>
</div>

<div dir="ltr"><a ymailto="mailto:AT@lists.antique-tractor.com" href="mailto:AT@lists.antique-tractor.com">AT@lists.antique-tractor.com</a><br>
</div>

<div dir="ltr"><a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</div>
</div>
</div>
</div>