<div dir="ltr">I might need to re-read the machinery lubrication article Jim posted.  Is it saying an NLGI 2 is actually a *better* choice than thinner NLGI 0/00 ("corn head grease").  I took the article to be simply affirmation that the old grease trick in place of gear oil is can be a good solution in some circumstances, like steering gearboxes.<div><br></div><div>SO</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jul 7, 2020 at 8:58 PM John Hall <<a href="mailto:jtchall@nc.rr.com">jtchall@nc.rr.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I'm with you on this one Jim. I would think plain old grease would be <br>
just fine in a steering box on a 70 year old tractor that will run 10 <br>
hours a year in 30 minute intervals. The only person to cuss you will be <br>
the mechanic that ever opens it up to fix it!!!! At the end of the day, <br>
anything that will stay in the box is better than nothing!!!<br>
<br>
John Hall<br>
<br>
<br>
<br>
On 7/7/2020 11:31 AM, Jim Becker wrote:<br>
> So all you have to do is spin the steering wheel at a couple thousand <br>
> RPM for a few minutes and you'll be ready to go? :)<br>
><br>
> Jim Becker<br>
><br>
> -----Original Message----- From: Cecil Bearden<br>
> Sent: Tuesday, July 07, 2020 9:48 AM<br>
> To: <a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a><br>
> Subject: Re: [AT] Cub - Update<br>
><br>
> It is used on Hesston Rotary mower conditioners with some pretty high<br>
> dollar bearings in them, so I would think that it lubricates when hot.<br>
> I have put it in a RT913 Roadranger that leaked at the PTO and it<br>
> stopped leaking.  It has to run a few minutes when cold to shift easily,<br>
> but otherwise I have had no problems...<br>
> Cecil<br>
><br>
> On 7/6/2020 10:52 PM, Steve W. wrote:<br>
>> Stephen Offiler wrote:<br>
>>> Hi Cecil:  I've been warned that the grease trick is a little <br>
>>> sketchy; it gets pushed aside over time and ends up doing not much <br>
>>> good.  And it has next to zero chance of working itself down to the <br>
>>> pivot.  Those are the downsides of the grease trick.  I will still <br>
>>> give it serious consideration. Curious, what is special about this <br>
>>> corn picker grease?<br>
>>><br>
>>> SO<br>
>><br>
>> 00 or Corn head "grease" is somewhat of a misnomer. It goes in like a <br>
>> grease but as soon as things move in it the viscosity becomes more <br>
>> like a very thick oil. It's what a lot of snowblower gearboxes have <br>
>> in them.<br>
>><br>
>> Video on the stuff - <a href="https://www.youtube.com/watch?v=7zNhli-J0Gk" rel="noreferrer" target="_blank">https://www.youtube.com/watch?v=7zNhli-J0Gk</a><br>
>><br>
> _______________________________________________<br>
> AT mailing list<br>
> <a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
> <a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
> _______________________________________________<br>
> AT mailing list<br>
> <a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
> <a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
<br>
_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</blockquote></div>