<div dir="ltr">I'd second this. You need a trailer deck and have poplar out your ears? You need a poplar trailer deck even if it only lasts 10yrs instead of 30. Try one of the treatment recipes especially the ones treating end cuts. I suspect the boards will outlast the trailer frame.<div><br></div><div>Warren</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Mon, May 18, 2020 at 9:59 AM Gunnells, Brad R <<a href="mailto:brad-gunnells@uiowa.edu">brad-gunnells@uiowa.edu</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<div dir="ltr">
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
I consider myself (to use a phrase Farmer coined) frugal. So if you have an abundance of something available to you, I'd consider using it. It may not be as strong as oak, or last as long as chemically treated lumber, but that's not to say it won't "work".</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
If I recall this was an old pop-up camper frame. I don't recall what you were going to use it for/haul on it. As long as there are enough cross members to support the wood.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
My mix of choice for the trailer decking is to take my old motor oil and mix it 50/50 with diesel. That way I can put it through a sprayer. The last time I re-decked my trailer I used common 2x12 lumber. Since the rot always occurs at the end where the boards
are in a pocket I stood them on end for a week while in a plastic barrel of oil/diesel mix. That way it would soak well into the ends where I needed it most. Then I sprayed one side and let it soak in. Then mounted that facing down on the trailer. Then came
back and sprayed the topside. It's been about 6-7 years now and the deck is still solid. I spray it down every once in a while and it needs it again. Only downfall is these are finished boards so it will be a bit slick when wet after treatment.</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
Just another opinion.....</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
<br>
</div>
<div style="font-family:Calibri,Arial,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
Brad</div>
<div id="gmail-m_-1505178720508438057appendonsend"></div>
<hr style="display:inline-block;width:98%">
<div id="gmail-m_-1505178720508438057divRplyFwdMsg" dir="ltr"><font face="Calibri, sans-serif" style="font-size:11pt" color="#000000"><b>From:</b> AT <<a href="mailto:at-bounces@lists.antique-tractor.com" target="_blank">at-bounces@lists.antique-tractor.com</a>> on behalf of Andy Glines <<a href="mailto:andyglines@hotmail.com" target="_blank">andyglines@hotmail.com</a>><br>
<b>Sent:</b> Monday, May 18, 2020 6:44 AM<br>
<b>To:</b> atis <<a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a>><br>
<b>Subject:</b> [External] Re: [AT] Trailer Deck</font>
<div> </div>
</div>
<div dir="ltr">
<div style="font-family:Calibri,Helvetica,sans-serif;font-size:12pt;color:rgb(0,0,0)">
I subscribe to the ATIS digest so responding to individual messages is a little cumbersome. Thank you to everyone for the information and advice about which material to use for my trailer deck. I was curious about plywood because I thought that it might increase
the stiffness of the trailer but it seams like individual boards will be the way to go. To bad nobody recommended poplar. I have rough-sawed poplar running out my ears!</div>
</div>
</div>
_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</blockquote></div>