<div dir="ltr">Wow, Cecil, that's quite an equipment list!  Some big heavy stuff on that list!  The only manual machining I do is making little tools, jigs & fixtures, and "my" shop here at work has just one (very nice) Hardinge HLV-H "Super Precision" lathe, a 2J-head Bridgeport, a Kent 6x18 grinder, and a DoAll bandsaw.  The magic is always in the accessories; the 5C collets and the 4-jaw chuck for the Hardinge, the R8 collets for the mill, the various precision vises and other workholding for mill & grinder, indexing heads, and a whole compliment of cutters, drills, taps, wheels, etc etc.<div><br></div><div>Oh and I do owe you a response on the ESAB plasma cutter.  Unfortunately, it's a pass.  Sorry.  We have this one job we're developing now that involves making rather precise cuts, but we're already down that road with a chop-saw that's working quite well.  We just do basically zero with sheet material most suited for plasma.</div><div><br></div><div>SO</div><div> </div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Apr 3, 2020 at 9:54 AM Cecil Bearden <<a href="mailto:crbearden@copper.net">crbearden@copper.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I planned to open a machine shop when I retired..  However, here in OK <br>
there is not much demand and the only jobs I had were making some <br>
decorating crap for some traveling vendors.  The biggest job was wire <br>
forming for some Potpourri Pie holders.  I had to build a jig to bend <br>
the handles with an air cylinder and rack and pinion. Then I had to roll <br>
a ring and weld it together with m spot welder then spot weld the rings <br>
to the handles  The handles were also the feet to hold it above the <br>
stove burner.  I lost the pics of it.  I had a 20KW spot welder and had <br>
traded for a 10hp Variable frequency driver and motor from a technical <br>
school.  I dropped the amperage with the variable frequency drive to <br>
keep from burning the wires up.  The wires were about 3/16 dia.<br>
It was fun for a while, then I felt like I was wasting my talents on <br>
crap...  Machine shops were  closing down here to send jobs offshore.  <br>
So, I have a building with a 36x120 lathe, a 16x84 lathe, a 9x40 lathe, <br>
a Cincinnati Mill with a 16x72 table and universal head,  2ea Kearney <br>
Trecker mills with universal heads, another later model Cincinnati <br>
overarm mill with a 16 x 72 table, A Bridgeport, a couple of knee mills <br>
one Japanese, the other old old US made.  I did one job with the newer <br>
Cincinnati overarm making T-nuts for a big holding table.  Now they just <br>
sit in case I need to make a part for my old junk.  Then I was going to <br>
build industrial engines, and bought the boring bars, head work <br>
equipment and a big big crank grinder.  Never got the crank grinder set <br>
up.  It is still on a trailer and a stray tornado took out the building <br>
it was stored under.<br>
Cecil<br>
<br>
On 4/3/2020 7:01 AM, Mark Johnson wrote:<br>
> Hey - no problem with the CNC talk, at least not from me. I've been a <br>
> software guy all my life but I find machining absolutely fascinating - <br>
> wish I had learned more about it! I'm learning now...<br>
><br>
> Mark J<br>
><br>
> Columbia, MO<br>
><br>
> On 4/3/2020 5:38 AM, Stephen Offiler wrote:<br>
>> Hi John -<br>
>><br>
>> Hope the list will tolerate some CNC banter.  We have 1 job that we <br>
>> hold close, using .0001" offsets; all the rest it would be more like <br>
>> .0005" or more.  Swiss excels in small precise stuff and also long <br>
>> slender stuff, and we are heavy on the latter. Don't need all that <br>
>> precision, but it's handy to have:  I can give the guys setup sheets <br>
>> with .XXX" dimensions and no tolerance, and they can hit the numbers <br>
>> dead-on quite easily. Keeps me from having to even think about <br>
>> tolerances which is quite a luxury for an engineer.<br>
> _______________________________________________<br>
> AT mailing list<br>
> <a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
> <a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</blockquote></div>