<div dir="ltr">Brad, and Jim:<div><br></div><div>Picture attached.  Mine attaches to the *inside* of the valve stem, core removed.  The Slime branded tool attaches to the *outside* and the problem with that is the fact that the hole in the rim has to be large enough for the tool to fit through.  On the other hand, mine works even  on rims where the hole is just barely larger than the valve stem (example, motorcycles).  Admittedly, if you are installing tubes into formerly tubeless setups, the hole in the rim is going to be larger, and the Slime tool works fine.  The first one I built was just like the Slime tool, using a metal cap and attaching to the outside of the valve stem, and it was fine on wheelbarrow and lawnmower wheels but I had to modify it when I first did a motorcycle tube.</div><div><br></div><div>SO</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Apr 10, 2019 at 4:00 PM Gunnells, Brad R <<a href="mailto:brad-gunnells@uiowa.edu">brad-gunnells@uiowa.edu</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">





<div lang="EN-US">
<div class="gmail-m_-3592241520416364094WordSection1">
<p class="MsoNormal">Thanks Jim for that link. Yeah for $5 I probably wouldn’t put together anything as easy to use either. Wish I’d have known about this when placing other orders from them…….<u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<p class="MsoNormal"><span style="font-size:10.5pt;color:black">Brad</span><u></u><u></u></p>
<p class="MsoNormal"><u></u> <u></u></p>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(181,196,223);padding:3pt 0in 0in">
<p class="MsoNormal"><b><span style="font-size:12pt;color:black">From: </span></b><span style="font-size:12pt;color:black">AT <<a href="mailto:at-bounces@lists.antique-tractor.com" target="_blank">at-bounces@lists.antique-tractor.com</a>> on behalf of Jim Becker <<a href="mailto:mr.jebecker@gmail.com" target="_blank">mr.jebecker@gmail.com</a>><br>
<b>Reply-To: </b>Antique group <<a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a>><br>
<b>Date: </b>Wednesday, April 10, 2019 at 12:58 PM<br>
<b>To: </b>Antique group <<a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a>><br>
<b>Subject: </b>Re: [AT] [External] Re: tire tools was brand<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><u></u> <u></u></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">For 5 bucks, it isn’t worth spending a lot of time making one.<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"><a href="https://www.etrailer.com/Tire-Inflation-and-Repair/Slime/SLM20075.html" title="https://www.etrailer.com/Tire-Inflation-and-Repair/Slime/SLM20075.html" target="_blank">https://www.etrailer.com/Tire-Inflation-and-Repair/Slime/SLM20075.html</a><u></u><u></u></span></p>
</div>
<div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black"> <u></u><u></u></span></p>
</div>
<div>
<div>
<p class="MsoNormal" style="background:whitesmoke"><b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black">From:</span></b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black"> Stephen Offiler
<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal" style="background:whitesmoke"><b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black">Sent:</span></b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black"> Wednesday, April 10, 2019 12:02 PM<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal" style="background:whitesmoke"><b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black">To:</span></b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black"> Antique Tractor Email Discussion Group
<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal" style="background:whitesmoke"><b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black">Subject:</span></b><span style="font-size:10pt;font-family:tahoma,sans-serif;color:black"> Re: [AT] [External] Re: tire tools
 was brand<u></u><u></u></span></p>
</div>
</div>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
</div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">OK, will do Brad.  Jotted it on the calendar/task list, which is mandatory if I am going to actually do *anything* I say.
<u></u><u></u></span></p>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">SO<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
<div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">On Wed, Apr 10, 2019 at 12:47 PM Gunnells, Brad R <<a href="mailto:brad-gunnells@uiowa.edu" target="_blank">brad-gunnells@uiowa.edu</a>> wrote:<u></u><u></u></span></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin-left:4.8pt;margin-right:0in">
<div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">If you ever get a chance you should take a picture of that. I’d like to see how you did it. I’ve got the bar type tool for pulling tubeless
 valve stems into a wheel or the thread repair/remover valve tool that I use to hold a tube from falling back in once inserted into the wheel. I can see where what you’ve made could be handy on those small little tires where not having the valve stem through
 the rim would make them easier to mount.<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:12pt;color:black">Thanks<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:12pt;color:black">Brad<u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
<div style="border-right:none;border-bottom:none;border-left:none;border-top:1pt solid rgb(181,196,223);padding:3pt 0in 0in">
<p class="MsoNormal"><b><span style="font-size:12pt;color:black">From:
</span></b><span style="font-size:12pt;color:black">AT <<a href="mailto:at-bounces@lists.antique-tractor.com" target="_blank">at-bounces@lists.antique-tractor.com</a>> on behalf of Stephen Offiler <<a href="mailto:soffiler@gmail.com" target="_blank">soffiler@gmail.com</a>><br>
<b>Reply-To: </b>Antique group <<a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a>><br>
<b>Date: </b>Wednesday, April 10, 2019 at 10:52 AM<br>
<b>To: </b>Antique group <<a href="mailto:at@lists.antique-tractor.com" target="_blank">at@lists.antique-tractor.com</a>><br>
<b>Subject: </b>[External] Re: [AT] tire tools was brand<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">Absolutely.  I built myself just such a tool and use it everywhere there's a tube being installed, including wheelbarrow and small trailer
 tires, motorcycle tires, etc.  Mine is based on an old valve core and a piece of bicycle brake cable.
<u></u><u></u></span></p>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">SO<u></u><u></u></span></p>
</div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
</div>
</div>
<p class="MsoNormal"><span style="font-size:12pt;color:black"> <u></u><u></u></span></p>
<div>
<div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">On Wed, Apr 10, 2019 at 11:31 AM James Peck <<a href="mailto:jamesgpeck@hotmail.com" target="_blank">jamesgpeck@hotmail.com</a>> wrote:<u></u><u></u></span></p>
</div>
<blockquote style="border-top:none;border-right:none;border-bottom:none;border-left:1pt solid rgb(204,204,204);padding:0in 0in 0in 6pt;margin:5pt 0in 5pt 4.8pt">
<p class="MsoNormal"><span style="font-size:12pt;color:black">One key tool was the device to pull the tire tube valve through the hole.<br>
<br>
<a href="https://www.youtube.com/watch?v=4TbPJvtfY6k" target="_blank">https://www.youtube.com/watch?v=4TbPJvtfY6k</a><br>
<br>
Here is a YouTube of mounting a tire on a rim. <br>
<br>
<a href="https://www.youtube.com/watch?v=7rCvy6rbAog" target="_blank">https://www.youtube.com/watch?v=7rCvy6rbAog</a><br>
<br>
[James Peck] What tire tools do you use and can you advise as to where you got them.<br>
<br>
[Cecil Bearden] In my case, I mount my own tires and it takes me a day to mount 2 tires with fluid in them because of my disabilities.  However, If I had them mounted, it would be nearly $500, so I think I made a pretty good day's pay.  Due to the difficulty
 or expense of mounting tires, I will only buy new when replacing tires.   Do it once and forget it....   As I said before, stay away from SPEEDWAY tires...They do not fit.. I spent over $250 in tubes and lost over $200 in alcohol fluid due to these tires...<br>
_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><u></u><u></u></span></p>
</blockquote>
</div>
</div>
</div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><u></u><u></u></span></p>
</blockquote>
</div>
<div class="MsoNormal" align="center" style="text-align:center"><span style="font-size:12pt;color:black">
<hr size="0" width="100%" align="center">
</span></div>
<p class="MsoNormal"><span style="font-size:12pt;color:black">_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><u></u><u></u></span></p>
</div>
</div>
</div>
</div>
</div>

_______________________________________________<br>
AT mailing list<br>
<a href="mailto:AT@lists.antique-tractor.com" target="_blank">AT@lists.antique-tractor.com</a><br>
<a href="http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com" rel="noreferrer" target="_blank">http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com</a><br>
</blockquote></div>