[AT] Motostandard
Phil Auten
pga2 at basicisp.net
Thu Sep 23 15:59:12 PDT 2021
Yeah, as long as it isn't a BIG moose, unless it is a downhill pull all
the way. 😁
Phil in TX
On 9/23/2021 10:47 AM, Spencer Yost wrote:
> Being used as a moose puller, I think MP is more appropriate. MP
> stands for Moose (it can) Pull. Clearly this thing could only be 1MP.
>
> Spencer
>
> Sent from my iPhone
>
>> On Sep 23, 2021, at 5:52 AM, Stephen Offiler <soffiler at gmail.com> wrote:
>>
>>
>> I continue to assume either KW or PS, but not HP. (Granted PS and HP
>> are pretty darn close). I'm at least mildly interested to know what
>> units were customary when/where this machine was built.
>>
>> Using SAE values: if this engine of 24 cu in displacement was
>> capable of 1 ft-lb torque per cu in (a good rule of thumb for modern
>> engines) at 3000rpm it would be making 13.7 HP. I'd bet torque is
>> not up to modern standards and peaks well below 3000rpm, so 8.9PS
>> (=8.8HP) seems the best guess; whereas 8.9KW is over 11HP.
>>
>> SO
>>
>>
>> On Wed, Sep 22, 2021 at 9:33 PM Carl Szabelski
>> <c.s.szabelski at gmail.com <mailto:c.s.szabelski at gmail.com>> wrote:
>>
>> Puissance means several things and can be used in several ways.
>> One meaning is the height that a horse can jump. Several meanings
>> are for “POWER” of various types, including mechanical. So I
>> would assume that the 8.9 means 8.9 horsepower.
>>
>> Carl
>>
>> On Wednesday, September 22, 2021, Tom Martin <tmartin at xtra.co.nz
>> <mailto:tmartin at xtra.co.nz>> wrote:
>>
>> You missed my point, but never mind...
>>
>> Tom
>>
>>
>>> On 23 September 2021 at 06:49 Stephen Offiler
>>> <soffiler at gmail.com <mailto:soffiler at gmail.com>> wrote:
>>>
>>> The language is French but the machine is Swiss. I've never
>>> heard of "CV" but it turns out it's just another name for
>>> metric horsepower (PS).
>>>
>>> SO
>>>
>>> On Wed, Sep 22, 2021 at 2:36 PM Tom Martin <
>>> tmartin at xtra.co.nz <mailto:tmartin at xtra.co.nz>> wrote:
>>>
>>> Surely, being French the units would be cv -/cheval-vapeur /
>>>
>>> /Tom
>>> /
>>>
>>>> On 23 September 2021 at 01:08 Stephen Offiler <
>>>> soffiler at gmail.com <mailto:soffiler at gmail.com>> wrote:
>>>>
>>>> I wondered the same thing, Phil. "Puissance" is Power
>>>> and the dataplate gives 8.9 with no units. Now IF the
>>>> correct units are KW, that converts to 11.9HP. Another
>>>> guess at units would be PS ("PferdStarke") aka "metric
>>>> horsepower" amd 8.9PS converts to 8.8HP.
>>>>
>>>> I think "regime" means "governor" at 3000rpm sounds right.
>>>>
>>>> "Alesage" is bore, so maybe "course" is stroke. The
>>>> numbers in mm give displacement of 391cc which appears
>>>> to match the stated "Cylindree" of 400; I guess this is
>>>> a single-cylinder engine.
>>>>
>>>> SO
>>>>
>>>>
>>>> On Wed, Sep 22, 2021 at 8:22 AM Phil Auten <
>>>> pga2 at basicisp.net <mailto:pga2 at basicisp.net>> wrote:
>>>>
>>>> Interesting little machine. I cannot tell how much
>>>> horsepower the dataplate tells us. Maybe 2?
>>>>
>>>> Phil in TX
>>>>
>>>> On 9/22/2021 2:08 AM, Mattias Kessén wrote:
>>>>> Hi,
>>>>> I've never seen one of these before so I thought
>>>>> I'd better share it.
>>>>>
>>>>> https://www.blinto.se/auction/Motostandard-134612-36985
>>>>> <https://www.blinto.se/auction/Motostandard-134612-36985>
>>>>>
>>>>>
>>>>> Med vänlig hälsning
>>>>>
>>>>> Mattias Kessén
>>>>>
>>>>> Hässelstad Solhöjden 2
>>>>> 594 93 Gamleby
>>>>>
>>>>> 070-523 59 00
>>>>>
>>>>> _______________________________________________
>>>>> AT mailing list
>>>>> AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>>>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>>> _______________________________________________
>>>> AT mailing list
>>>> AT at lists.antique-tractor.com
>>>> <mailto:AT at lists.antique-tractor.com>
>>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>>> <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>>>
>>>>
>>>> _______________________________________________
>>>> AT mailing list
>>>> AT at lists.antique-tractor.com
>>>> <mailto:AT at lists.antique-tractor.com>
>>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>>> <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>>>
>>> _______________________________________________
>>> AT mailing list
>>> AT at lists.antique-tractor.com
>>> <mailto:AT at lists.antique-tractor.com>
>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>> <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>>
>>>
>>> _______________________________________________
>>> AT mailing list
>>> AT at lists.antique-tractor.com
>>> <mailto:AT at lists.antique-tractor.com>
>>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>> <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>>
>>
>> _______________________________________________
>> AT mailing list
>> AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>> <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>
>> _______________________________________________
>> AT mailing list
>> AT at lists.antique-tractor.com
>> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210923/102c2189/attachment.htm>
More information about the AT
mailing list