[AT] Deere versus IHC wheel rims

[Cecil Bearden]

Thanks Carl
Cecil


On 11/28/2021 11:26 AM, Carl Szabelski wrote:
>
>
> On Sunday, November 28, 2021, Cecil Bearden <crbearden at copper.net 
> <mailto:crbearden at copper.net>> wrote:
>
>     My situation is the H is 60 miles away and has been sitting for a
>     while ( ? years ) The Deere rim and tire is here.   I need to take
>     a tire & rim to mount on the H to load it...
>
>     Cecil
>
>
>     On 11/27/2021 8:04 PM, Jim Becker wrote:
>>     This shouldn’t be hard to figure out.  As far as I know, all 38”
>>     rims on Hs were a standard deep well rim.  I suppose John Deere
>>     used the same.  I would think any rim that looks about right is
>>     right. Anything that won’t fit is obviously a non-starter. If it
>>     looks about right, check the inside diameter and the width of the
>>     portion that gets clamped by the lugs.
>>     If your Deere rims are double bevel or whatever, they should
>>     immediately fail the “looks about right” test.
>>     Jim Becker
>>     *From:* deanvp
>>     *Sent:* Saturday, November 27, 2021 6:12 PM
>>     *To:* Antique Tractor Email Discussion Group
>>     *Subject:* Re: [AT] Deere versus IHC wheel rims
>>     Check with Miller Tire in Ohio.  They will be able to provide
>>     compatibility info.
>>     Sent from my Galaxy
>>     -------- Original message --------
>>     From: Carl Szabelski <c.s.szabelski at gmail.com>
>>     <mailto:c.s.szabelski at gmail.com>
>>     Date: 11/27/21 1:52 PM (GMT-07:00)
>>     To: Antique Tractor Email Discussion Group
>>     <at at lists.antique-tractor.com> <mailto:at at lists.antique-tractor.com>
>>     Subject: Re: [AT] Deere versus IHC wheel rims
>>     Some JD and Farmall rims are interchangeable. Depends on the year
>>     and model. If you know what JD they came off of, you maybe able
>>     go to someplace like Steiner Tractor Parts and look them up. Then
>>     you can see if the descriptions indicates that they also fit a H.
>>     Carl
>>
>>     On Saturday, November 27, 2021, Cecil Bearden
>>     <crbearden at copper.net> wrote:
>>
>>         I bought a H farmall on an auction just before the plandemic
>>         and while it was sitting over a year, the calcium leaked out
>>         and the rim is now shot.  I bought a couple of mounted 13-38
>>         wheels and tires from an old John Deere collector a few miles
>>         away.  Would the John Deerre rim fit on the H farmall?  they
>>         are both 38 diameter, but I am not sure about the wedges or
>>         the double bevel or whatever they are called..
>>
>>         Cecil
>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>         _______________________________________________
>>>         AT mailing list
>>>         AT at lists.antique-tractor.com
>>>         http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com  <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>
>>     ------------------------------------------------------------------------
>>     _______________________________________________
>>     AT mailing list
>>     AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>>     http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>>     <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>>
>>     _______________________________________________
>>     AT mailing list
>>     AT at lists.antique-tractor.com  <mailto:AT at lists.antique-tractor.com>
>>     http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com  <http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com>
>
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20211128/cc3362f9/attachment.htm>