[AT] Pasture drag, rake, ???

[Steve W.]

Dean VP wrote:
> What do you guys think of this unit from Tractor Supply at $259 and then 
> attaching a 4’ heavy plow beam section at the tail end to create more 
> down pressure due to added tension and smooth things out a bit after the 
> teeth do their job? I would then just drag this behind the Garden 
> Tractor when I mowed.  I don’t think the drag rake by itself would do 
> the job but adding the heavy plow beam at the tail end might help quite 
> a bit.  A longer tow chain might reduce the tendency to lift the front 
> of the drag harrow too.  Worst case one could add weight on top but I 
> don’t see how that weight gets distributed very well with a chain drag. 
> See URL Link below:
> 
>  
> 
> https://www.tractorsupply.com/tsc/product/yard-tuff-4-ft-x-4-ft-heavy-duty-drag-harrow
> 
>  
> 
> This can be purchased elsewhere for $239 but then $70 to $80 freight is 
> added.  At $259 at TSC is gets delivered to the store. That is only 7 ½ 
> miles away for me. Haven’t found anything that beats that yet.
> 
>  
> 
> PS, I was thinking of pulling my water filled barrel roller behind this 
> to push the loosened rock back into the ground but that is too  heavy 
> and cumbersome I think   And would not work very good going down hill.  
> 
>  
> 
>  
> 
>  
> 
> Dean VP
> 
> Snohomish, WA 98290
> 
> "Socialism is a philosophy of failure, the creed of ignorance, and 
> gospel of envy, its inherent virtue is the equal sharing of misery."
> 
> ..Winston Churchill...
> 

Build yourself something like this

https://www.tractorsupply.com/tsc/product/handozer-42-in-gravel-and-soil-drag-d35-mg

-- 
Steve W.