[AT] Air conditioning problems In my parts getter...

[Cecil Bearden]

I checked that..  Alll the way out.

Cecil

On 6/11/2021 5:26 PM, szabelski at wildblue.net wrote:
> Cecil,
>
> Is it possible that the connector is already partially screwed down preventing you from full engagement?
>
> Carl
>
> ----- Original Message -----
> From: Cecil Bearden <crbearden at copper.net>
> To: at at lists.antique-tractor.com
> Sent: Fri, 11 Jun 2021 15:33:26 -0400 (EDT)
> Subject: Re: [AT] Air conditioning problems In my parts getter...
>
> I went to add freon to my Big Belarus this morning.  The high side
> connector would not connect.  No matter how hard I pushed on the
> connector it would not go on far enough to connect with the groove.   I
> had to replace the freon a couple of years ago when the tractor was
> split, but I don't remember having any problems. The connectors I use
> are the ones that attach then screw the knob at the end to depress the
> schrader valve and connect..
>
> Cecil
>
> On 6/11/2021 12:30 PM, Steve W. wrote:
>> Cecil Bearden wrote:
>>> Steve:
>>>
>>> I will check into it.  Some of the tractors have some leaks I can't
>>> find.
>>> Cecil
>>>
>>>
>> The bigger shops are using nitrogen for testing because the sniffers
>> are cheaper and it does work, but I have CO2 on hand for the welder so
>> why have a bunch of extra bottles to pay for.
>>
>> I've found a lot of leaks just using the cheap bubble fluid you can
>> get in the dollar stores. Doesn't have all the extra stuff like a dish
>> soap has and it creates larger bubbles.
>>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com