[AT] AT Digest, Vol 42, Issue 12

[STEVE ALLEN]

Ouch!

We used to have a go\od machine shop here in Rolla, but it is, alas! long gone.

Let me suggest he contact 2-cylinder Salvage (http://2cylplus.com/) and Sharp's Tractor (www.oldjdforyou.com), both around Conway/Fair Grove, to see if they can offer any leads.  If there is something in the area, they might know.

The "original" Steve Allen

----- Original Message -----

Message: 2
Date: Fri, 16 Jul 2021 19:06:53 +0000
From: Bill Brueck <bill at apluscomputer.com>
To: Antique Tractor Email Discussion Group
	<at at lists.antique-tractor.com>
Subject: [AT] John Deere model E bore job
Message-ID:
	<CY4PR08MB2837653658FDA957F01852EAC2119 at CY4PR08MB2837.namprd08.prod.outlook.com>
	
Content-Type: text/plain; charset="utf-8"

I've got a friend who needs to have a 1 1/2 hp Deere E bored oversize.  So far he's found Flywheel Supply in LeMars, Iowa who will do it for $500 and he'll have freight expenses both ways.

Is that the going rate, or are there other shops folks know about who can do a good job for less?  He's near Springfield, Missouri.

B?
Bill Brueck
   Pine Island, MN USA