[AT] Allis B progress

[Mogrits]

Also, Yesterdays Tractors used to sell reproductions of AC/B manifolds
pretty cheap

On Mon, Feb 1, 2021 at 9:17 PM Milo Holroyd <milo at milosmachineshed.com>
wrote:

> On 2/1/21 7:42 PM, Dennis Johnson wrote:
>
> Today I did more disassembly of the Allis B. Got engine out and put it on
> an engine stand. Soaking pistons with penetrating oil. Using word block and
> hammer to try and jar pistons. The good news it that 3 of the 4 pistons
> sound a little different when hitting the wood with a hammer. 1 of them is
> more of a dull thud. I am thinking the other 3 are closer to moving, and
> the one is stuck a lot tighter than the others are.
> I need to get my puller up here so I can try to remove front crank pulley.
> It is just stuck on there, without a bolt to hold it in place.
>
> Dennis
>
>
> Sent from my iPad
>
> _______________________________________________
> AT mailing listAT at lists.antique-tractor.comhttp://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> Nice work. I just pulled the press fit crankshaft pulley off the Farmall
> 100 that I'm working on. I put a bearing separator behind the pulley and
> pulled on that with a 2 jaw puller (no room for 3).
>
> No problems with damage to the pulley. I also discovered that the crank is
> tapped (1/2-13) so I pushed against a bolt head instead of the crank end.
>
> Milo
>
> ( I also have a B that needs a new a manifold)
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210201/9dacbb1c/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image0.jpeg
Type: image/jpeg
Size: 924420 bytes
Desc: not available
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20210201/9dacbb1c/attachment-0002.jpeg>