[AT] AAV running bad

Jason dejoodster at gmail.com
Thu May 21 08:30:17 PDT 2020


If put it on half choke does it still stall when you rev it up?

On Thu, May 21, 2020, 9:19 AM <bobbyguilbeau at att.net> wrote:

> Guess I need to start with ignition parts just in case, if it’s not that
> then I’ll have an extra set that’s good for later.
>
>
>
> Thanks
>
>
>
>
>
>
>
> *From:* AT <at-bounces at lists.antique-tractor.com> *On Behalf Of *John Hall
> *Sent:* Wednesday, May 20, 2020 9:21 PM
> *To:* at at lists.antique-tractor.com
> *Subject:* Re: [AT] AAV running bad
>
>
>
> Yeah thats a weird one to diagnose unless you are standing there.
>
> On 5/20/2020 12:34 AM, bobbyguilbeau at att.net wrote:
>
> John,
>
>
>
> Been sitting about three years, did a complete rebuild of the engine about
> 4 years ago, ran fine.  Had an issue with the hydraulic pump that I
> procrastinated on and finally got the gumption to take care of that and get
> it running again.  Carb has been opened up cleaned, used carb cleaner,  new
> gaskets and put back together.  Fuel is fresh as well.  Checked the points
> they are like new, distributor cap looks good too
>
>
>
> Might need to try fuel from another location just in case, but all my
> small engines are doing fine
>
>
>
> Bobby Guilbeau
>
>
>
> *From:* AT <at-bounces at lists.antique-tractor.com>
> <at-bounces at lists.antique-tractor.com> *On Behalf Of *John Hall
> *Sent:* Tuesday, May 19, 2020 6:21 PM
> *To:* at at lists.antique-tractor.com
> *Subject:* Re: [AT] AAV running bad
>
>
>
> Assuming its the carb, take it apart and clean it, wouldn't replace unless
> it really worn. Now it could be a host of other things and I didn't notice
> where you posted on other work done, how long its been sitting, how old the
> fuel is, etc.
>
> John Hall
>
> On 5/19/2020 4:21 PM, bobbyguilbeau at att.net wrote:
>
> Finally got to get the AV up and running, looking for guidance on what to
> try next as it runs fine when idling.  Give it some fuel and it starts
> running bad, so bad that it will kill.   I’m thinking it’s a carb (Carter)
> issue, just trying to decide if I should try a rebuild or just replace it?
>
>
>
>
>
>
>
> Bobby Guilbeau
>
> Saint Landry, LA  71367
>
>
>
>
>
>
> _______________________________________________
>
> AT mailing list
>
> AT at lists.antique-tractor.com
>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
>
>
>
> _______________________________________________
>
> AT mailing list
>
> AT at lists.antique-tractor.com
>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20200521/3a096d03/attachment.htm>


More information about the AT mailing list