[AT] New old truck

[ustonThomas Mehrkam]

You do not like cats🤪

Sent from AT&T Yahoo Mail on Android 
 
  On Wed, Mar 11, 2020 at 10:08 PM, szabelski at wildblue.net<szabelski at wildblue.net> wrote:   Look like you’ll be busy until Christmas.........2035😜

Carl
----- Original Message -----
From: Cecil Bearden <crbearden at copper.net>
To: at at lists.antique-tractor.com
Sent: Wed, 11 Mar 2020 22:50:30 -0400 (EDT)
Subject: Re: [AT] New old truck

I went to an auction yesterday.  I should have bought the 6600 JD 
combine that sold for $2000, but I didn't want to sleep with the cats in 
the barn..   Also picked up a 32ft Field cultivator/spring tooth.  If I 
take off the wigs I have a 12ft one and a lot of spare parts!!

I went after the 66 Chevrolet C60 w/ 20 ft bed & hoist air tag axle, 
Shurco tarp and Westfield drill fill auger.  For $2000 I figured the bed 
& hoist was worth that.  My drill fill auger needs a new auger and it is 
over $500.

The truck looks like it has a 366 engine.  OEM would have been a 348 or 
409 I think..  This has the valve covers of the 366 & 427 but only a 2 
bbl carb so I would guess 366.  It has a very worn 5 speed transmission 
and a 2 speed axle that shifts ok.  The cab is not in bad shape for a 
66.  If I can swap the power steering gear from a 67 or 68 model I have 
here, then I can change to the smaller steering wheel and maybe fit 
behind the wheel. Either that or lose 100 lbs.  I was looking at 
shortening the steering column as it can move forward under the dash If 
I shorten the steering tube and re-cut the splines on the steering 
shaft. I have a 18ft tilt bed hoist I would like to put on this one.  I 
have a 427 & 5speed in another truck that would give it a little more 
power.  The 366 did not seem to really have a lot of zip to it, but this 
truck has only been used about 50 miles a year for the last 10 years.   
If all else fails I can hop up a 350 with 10:1 compression and propane......

It is a lot of work, but I have this soft spot for the 60-66 Chevrolet 
trucks.  I rebuilt a lot of engines in those years for hopped up farm 
trucks.  I had a 52GMC 2 ton with a 16ft bed & hoist that would haul 300 
bushel at 70mph.  Back then we did not have the traffic on the highways 
we do now...

Just rambling......

Cecil


_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com

_______________________________________________
AT mailing list
AT at lists.antique-tractor.com
http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20200312/6bca5ac5/attachment.htm>