[AT] soda blasting

Milo Holroyd milo at milosmachineshed.com
Thu Nov 14 10:00:20 PST 2019


I love using soda on carb bodies and such. No worries about plugged 
orifices after rinsing in hot water, and a quick blow dry.
Even does a good job on the old cast iron Scheblers.


On 11/14/19 9:49 AM, James Peck wrote:
> A sandblaster that feeds out the bottom converts to a soda blaster with this kit. It looks like you could easily dulicate it.
>
> I am guessing that soda is more negatively affected by moisture than sand and that all soda would need to be removed after each blast session. Looks like you can blow the soda out with this set of valves.
>
> https://www.eastwood.com/1-2in-universal-soda-blasting-retro-fit-kit.html
>
> Soda blasting apparently does not remove so much metal from smooth surfaces.
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20191114/a0c0852c/attachment.htm>


More information about the AT mailing list