[AT] Case VAC throttle spring thingy...

[Cecil Bearden]

Take a look at the clearance items they have.  There are some good buys 
there.
Cecil

On 5/14/2019 7:57 PM, Indiana Robinson wrote:
> It's even worse than that... I looked at it very closely and I am sure 
> it is already broken and is being held in place with a piece of 
> twisted baling wire...
> We have bought a handful of things from them over the years and while 
> they were high we never had any problems with anything. I have to 
> wonder if this is a glitch and maybe the $55 is for the lever 
> assembly, not just the spring?
> .
> Well, I did have one problem... We bought a set of nice rims off of a 
> Ford 8000 but ended up not using them. The problem was local... I put 
> them out for sale and someone (I assume a scrapper) just loaded them 
> up one day. Hardly Robert's fault.  :-)
>
> .
>
> On Tue, May 14, 2019 at 8:30 PM <bloomis at charter.net 
> <mailto:bloomis at charter.net>> wrote:
>
>     Holy smokes. At $55 a pop for a pre-rusted out spring no wonder
>     they are all broken at shows.
>
>     Bradford
>
>     *From:* AT <at-bounces at lists.antique-tractor.com
>     <mailto:at-bounces at lists.antique-tractor.com>> *On Behalf Of
>     *Spencer Yost
>     *Sent:* Tuesday, May 14, 2019 3:58 PM
>     *To:* Antique Tractor Email Discussion Group
>     <at at lists.antique-tractor.com <mailto:at at lists.antique-tractor.com>>
>     *Subject:* Re: [AT] Case VAC throttle spring thingy...
>
>     It is because the search engines are not too adaptive. You have to
>     search for “thingy, spring”. :-)
>
>     Could this be it,
>
>     https://www.robertstractor.com/Case-vac-Foot-Spring_p_3882.html
>
>     Spencer Yost
>
>
>     On May 14, 2019, at 4:44 PM, Indiana Robinson
>     <robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>> wrote:
>
>         You will notice that I didn't use the correct name for the
>         throttle thingy, that is because I don't remember it and what
>         it is called is my question.  :-)
>
>         It is an odd spring that goes at the intersection of the hand
>         throttle and the foot accelerator linkages. It has hooks that
>         hook over the levers and it makes a circle or two around the
>         stud that the levers mount to. That convergence of linkages is
>         what allows the two feeds to operate separately.
>
>         The one on my non-running VAC is also broken and I once did
>         some looking at a tractor show and it was broken on several
>         VAC's at the show. Must have been a weak point, huh?  :-)
>
>         Anywho, I can't search for it unless I have a better name than
>         "spring thingy"...
>
>         .
>
>
>         -- 
>
>         -- 
>
>         Francis Robinson
>         aka "farmer"
>         Central Indiana USA
>         robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>
>
>
>
>
>
>
>
>         _______________________________________________
>         AT mailing list
>         AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>         http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>     _______________________________________________
>     AT mailing list
>     AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>     http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
>
> -- 
> -- 
>
> Francis Robinson
> aka "farmer"
> Central Indiana USA
> robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>
>
>
>
>
>
>
>
>
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20190514/7e931ea3/attachment.htm>