[AT] Update on the MF 1155
Cecil Bearden
crbearden at copper.net
Sun Feb 24 22:16:42 PST 2019
Correct, there is one but it is so fast you are not supposed to be able
to use it..
Cecil
On 2/25/2019 12:00 AM, deanvp at att.net wrote:
>
> Cecil,
>
> But there isn’t supposed to be a reverse in High Range. Correct? That
> is what you mean by a “Lock Out”
>
> Dean VP
>
> Apache junction, AZ
>
> *From:*AT <at-bounces at lists.antique-tractor.com
> <mailto:at-bounces at lists.antique-tractor.com>> *On Behalf Of *Cecil
> Bearden
> *Sent:* Sunday, February 24, 2019 10:25 PM
> *To:* at at lists.antique-tractor.com <mailto:at at lists.antique-tractor.com>
> *Subject:* Re: [AT] Update on the MF 1155
>
> Dean there is a reverse in the highest range. When the shifter gets
> worn enough it will go into high reverse. There is some sort of
> lockout in that range but I can get into it on my 4010. It really
> moves in that reverse...
>
> Cecil
>
> On 2/24/2019 10:30 PM, deanvp at att.net <mailto:deanvp at att.net> wrote:
>
> Cecil,
>
> Correct me if I am wrong but there is no reverse in the highest
> range, but all other range in the 4010??? I’m thinking 3010 but
> I would think the 4010 would be the same. A 4020 is considered
> by most JD people to be close to the best if not the best tractor
> JD ever made. I suspect there were quite a few engine changes made
> between the 4010 and 4020. Don’t know about the crank.
>
> Dean VP
>
> Apache junction, AZ
>
> *From:*AT <at-bounces at lists.antique-tractor.com>
> <mailto:at-bounces at lists.antique-tractor.com>*On Behalf Of *Cecil
> Bearden
> *Sent:* Sunday, February 24, 2019 8:00 PM
> *To:* at at lists.antique-tractor.com
> <mailto:at at lists.antique-tractor.com>
> *Subject:* Re: [AT] Update on the MF 1155
>
> The Deere 4010 & 4010 w/ synchro range is a good tractor for
> loader work. The reverse in every range makes it easy to load hay
> and unload trailers. I need to go get my Dad's old 4010 at
> another farm setting i a fence row. I also picked up a 4020
> w/cab last week, I think it has a bad or broke crank...
>
> Cecil
>
> On 2/24/2019 8:53 PM, Indiana Robinson wrote:
>
> Cecil: I'm sure you are right... This 1155 probably came from
> about 3 or 4 states west of here. My dealer friend made his
> fortune buying tractors and combines and other equipment
> farther west and bringing them back here to sell. He also
> deals in some local stuff but most of the stuff comes from his
> trips west because so much good stuff here sells too high for
> a good level of profit. When Scott bought this tractor he was
> not around because he was busy getting ready to hit the road
> the next morning for a trip west for a couple of large
> auctions. He has been hauling stuff back here to sell for as
> long as I have known him and that has been a long time.
>
> When Diana and I travelled west then to the north-east last
> summer I was reminded of just how different farming is at
> different locations around the country. We had been travelling
> south and east for a number of years before that. Farmers do
> have a lot in common no matter where they are (especially old
> tractors) but local differences can be pretty wide (and very
> interesting) like different soil types, levels of rainfall and
> when, erosion concerns etc. I suspect that you would be very
> surprised (because I have long been surprised) at how much
> moldboard plowing is still done here in Central Indiana and
> especially in Rush County, the next county east of me.
>
> I used to do some no-till but I don't see a lot of no-till
> around me. Here they started switching to no-till but then
> moved to mulch-till and the use of speciality finishing tools
> that are kind of a mix of tools all in one.
>
> Field tile drainage is really bigger than ever here in recent
> years and I can't really recall the last time I got stuck
> doing field work. A seed corn and food grade corn operation
> about 2 miles from me just tiled a farm nearby and they ran
> tile (plastic) lines about 60 feet apart all over several
> fields they recently acquired. They have their own tile plow
> and the tile is reasonable in cost.
>
> I did get stuck with a golf cart this week but I should have
> been in a boat. :-)
>
> Spencer: Son Scott is our youngest, our baby...He hates when
> we say that. :-) He is 46.
>
> Before I bought my Deere 4020 years ago I almost bought a 806.
> It was quite nice and the price was right but it was just so
> dang loud running. Not exhaust noise, compression hammering...
> I finally walked away from it. Everybody kept telling me that
> it was normal for them but I just didn't like the sound of it.
>
> I never regretted the 4020.
>
> On Sun, Feb 24, 2019 at 7:39 PM Tyler Juranek
> <tylerpolkaman at gmail.com <mailto:tylerpolkaman at gmail.com>> wrote:
>
> Hey Spencer and all,
> Believe it or not, dad bought a 966 here recently.
> Acording to the
> serial number, it was one that came out of the factory
> with a narrow
> front.
> He bought it with a wide front, but found a good narrow
> front to put back on it.
> He wants to have it all painted up and all that crap that
> his son
> doesn't care much about. :) Lol.
> The mechanical work has all been done I think. That is
> what matters
> most to me. I care more about mechanicals and tires, not
> about the
> paint jobs.
> And Spencer, when it comes to my father, everything is for
> sale...
> Tyler Juranek
> IA
>
> On 2/24/19, Spencer Yost <spencer at rdfarms.com
> <mailto:spencer at rdfarms.com>> wrote:
> > I am not sure of the age of your son Scott, it sounds
> like we must be pretty
> > close in age. When I think big tractors I think of
> those Massey’s too. More
> > so, I think of the “six” series Farmall and IH tractors.
> Like the 706 and
> > 966. I still keep an eye out for them. It’s a pipe
> dream, I never will own
> > one. Recently I saw this on craigslist:
> >
> >
> https://greensboro.craigslist.org/grd/d/coats-ih-706-tractor-plow-and-disk/6818930052.html
> >
> > If I was stupid rich or just plain stupid I would buy
> it. On my puny 15
> > acres I don’t even have enough room to turn it...
> >
> > Spencer Yost
> >
> >> On Feb 24, 2019, at 10:33 AM, Indiana Robinson
> <robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>>
> >> wrote:
> >>
> >> Son Scott did buy the MF 1155. I figured that he would.
> He has wanted one
> >> for too long and this one was in too good of general
> condition for him to
> >> pass it up. He had asked me to go with him when he
> first looked at it when
> >> there was no one around. It was sitting on the lot of a
> dealer I have
> >> bought stuff from for a very long time. Not constant
> purchases and not big
> >> stuff. I never farmed very big, couple of hundred acres
> most of the time.
> >> The farm is a lifestyle thing, I made most of my income
> from other
> >> enterprises. Still it takes a lot of equipment to do
> the job. Over the
> >> years I bought a couple of combines from him, a 20
> something foot wide
> >> harrogator, a wider set of wings for my big disk, field
> sprayer etc.
> >> Several years ago we bought a Vermeer round baler from
> him. He always
> >> treated me well. When I started dealing with him he was
> a small
> >> independent dealership and a farmer like a lot of other
> small dealers
> >> were. Today he and his sons have a huge operation with
> one huge building
> >> that is absolutely full of classic tractors that are
> not for sale. Over
> >> the years he has bought most of the farms that surround
> him and he now has
> >> his own system of private roads from one to another. We
> became business
> >> friends over those years and I was always impressed
> that when I walked in
> >> he always treated me the same as if I was one of the
> biggest farmers in
> >> the state. That is the way you should do business.
> >> Anywho... Scott had his mind mostly made up but wanted
> me to go along to
> >> help check it over carefully with it running and him
> driving it to check
> >> each function. We studied it pretty carefully for maybe
> 2 hours or more
> >> and if anything had popped up he would have backed away
> but he was
> >> confident enough that we went in a semi with a low-boy.
> I had to meet him
> >> at a local shopping center because it is pretty tough
> to get even a 40'
> >> trailer in to this farm and this was a 52' trailer.
> >> Everything seemed OK and they were willing to drop the
> price $500. He
> >> asked them to pop the duals off and load them on the truck.
> >> Kind of a funny bit of irony here... They have large
> industrial battery
> >> electric impact wrenches so they don't have to drag air
> hoses around.
> >> Worked really great but to get the duals off they had
> to jack the tractor
> >> up a little. Yep, pneumatic jack and an air hose
> dragged out to the apron
> >> where the tractor was sitting. :-)
> >> It all went well, of course Scott loads and hauls big
> stuff almost daily,
> >> sometimes several times a day. He spends more time
> behind a desk these
> >> days but he is still on job sites most days.
> >> The 1155 is quite wide. It has power adjust (spin out)
> rear wheels but
> >> also wide slide out axles. He is considering cutting
> down the axles some
> >> so the don't stick past the wheels. Thinks it might
> save some doorways.
> >> The duals are clamp on and don't use the axles. I doubt
> he will ever use
> >> the duals.
> >> I have a little Case VAC that has the wide axle option
> and I'm still
> >> considering chopping those... (shrug)
> >> We have 3 ways to get to the farm here, none of them
> semi friendly. :-)
> >> Coming in from the north requires going through an
> oddball 20' tall
> >> rail-road underpass that was built long long ago as a
> bridge over a fair
> >> sized creek and then back in about the 1920's people
> started driving
> >> around one side of it in dry weather on a gravel bar.
> It wasn't even a
> >> road then. Later a heavy one lane "U" shaped concrete
> "shelf" was poured
> >> around there for traffic. Scott comes through there
> fairly often with a
> >> tri-axle dump truck towing a tri-axle trailer with a
> backhoe/loader or
> >> maybe a good sized excavator but it is not suited for a
> semi at all. The
> >> other two directions are only slightly better due to
> utility poles in too
> >> close to the corners and narrow culverts. Scott
> considered parking on the
> >> wider road and unloading the tractor and me driving it
> home but then we
> >> would still have had to deal with the duals and it was
> a cold day. :-)
> >> He managed to get the longer trailer "buttoned" past
> the corners with only
> >> minimal damage to the road ditches which were about
> like quicksand.
> >> He has already been working on the 1155 for several
> days now off and on. I
> >> can about guarantee you that the first thing he did was
> rework all of the
> >> wiring. I noticed yesterday that he has the hood off
> and I think the
> >> whole exhaust system. It had some minor exhaust leakage
> where the manifold
> >> mounts to the heads and I know that he ordered a batch
> of gaskets for it.
> >> I know that he was planning on putting some money in it
> trying to get
> >> everything just right.
> >> It is important to understand here that while this
> tractor will not be an
> >> actual "trailer queen" this pretty much falls under the
> heading of "a toy
> >> he always wanted" like his Harley or his 4 wheeler and
> not a tractor to
> >> farm with productively. He works very hard and makes
> very good money and
> >> he plans his fun stuff too. I am not sure of the value
> of this tractor,
> >> the big tractors (this is 140 HP and about 20,000
> pounds ballasted) have
> >> never been on my wish list so I have not followed them.
> The 10 to 60 HP
> >> tractors are my choice and I like the smaller ones more
> all of the time
> >> like my Cub, Pony, VAC, Allis C etc.
> >> I don't guess he would mind me saying that he paid
> $7,000 for it. It's a
> >> nice tractor and when he asked me I told him that if he
> didn't like it
> >> after he bought it or something failed badly he could
> probably at least
> >> part it out for more than that...
> >> I'll have to see if I can convince him to take it to
> Portland. Then if he
> >> uses the semi he can haul a couple more for me. :-)
> :-) :-)
> >>
> >>
> >> .
> >>
> >> --
> >> --
> >>
> >> Francis Robinson
> >> aka "farmer"
> >> Central Indiana USA
> >> robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> AT mailing list
> >> AT at lists.antique-tractor.com
> <mailto:AT at lists.antique-tractor.com>
> >>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
> >
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> <mailto:AT at lists.antique-tractor.com>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
>
> --
>
> --
>
> Francis Robinson
> aka "farmer"
> Central Indiana USA
> robinson46176 at gmail.com <mailto:robinson46176 at gmail.com>
>
>
>
>
>
>
>
>
>
>
>
> _______________________________________________
>
> AT mailing list
>
> AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
> https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>
>
>
> Virus-free. www.avast.com
> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>
>
>
> _______________________________________________
>
> AT mailing list
>
> AT at lists.antique-tractor.com <mailto:AT at lists.antique-tractor.com>
>
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
>
>
> _______________________________________________
> AT mailing list
> AT at lists.antique-tractor.com
> http://lists.antique-tractor.com/listinfo.cgi/at-antique-tractor.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20190225/ffb99755/attachment.htm>
More information about the AT
mailing list