[AT] 430V update

[Mattias Kessén]

Congratulations!

www.rodjagard.n.nu

2017-09-22 3:33 GMT+02:00 Paul L Waugh <paul at plwaugh.com>:

> Yea, so cook to watch
>
> Paul - IN
>
>
> On 9/21/2017 8:39 PM, Spencer Yost wrote:
> > Good news is: it runs! Here's the video:
> >
> > https://youtu.be/VHXBUaZ_UuA
> >
> >
> > Bad news is it is pumping oil quite a bit  as you can tell from the
> video. So the rings are still stuck. So I am running it at varying speeds
> for 5-10 minutes  and letting it cool down. I have done that 3 times.  So
> it did not rake the hay today. Plus there's an issue with my three point
> rake. It requires stabilizer arms so that the rake doesn't swing  too
> much.  My stabilizers did. It fit do I did not put the 430 on the rake -
> maybe next year.
> >
> > The oil pumping has already improved some. So I feel pretty confident
> taking my time will  correct the problem.
> >
> > Since I raked, baled, and put up 206 bales of hay today I have not put
> much time in the 430.   Once the the dew lifted and I could work the hay
> the tractor was neglected.
> >
> > Spencer Yost
> >
> >> On Sep 21, 2017, at 11:30 AM, Paul L Waugh <paul at plwaugh.com> wrote:
> >>
> >> Straight pipe on my 420 has a sweet sound :)
> >>
> >> Paul - IN
> >>
> >>
> >>> On 9/20/2017 10:53 PM, Spencer Yost wrote:
> >>> Between a late day at work, stopping by the muffler shop for a chunk
> of pipe for the exhaust manifold, and needing to get the yard mowed, I
> didn't get everything buttoned up on the tractor until very late tonight.
> So it's a bit late too late to start a loud, straight pipe John Deere. Plus
> there's no way I could get a good video for Tyler in the dark.
> >>>
> >>> I am working remotely from home tomorrow so I can rake hay. I'll bet
> you I can sneak away from my computer just long enough to try to start it.
>  If the gods are smiling on me, I hope to be able to rake hay with the
> tractor.  :-).
> >>>
> >>> Stay tuned...
> >>>
> >>>
> >>>
> >>> Spencer Yost
> >>>
> >>>> On Sep 20, 2017, at 1:03 PM, Thanks Spencer Yost <yostsw at atis.net>
> wrote:
> >>>>
> >>>> I absolutely will Tyler - be glad to.   You might be able to hear all
> the way over there:   The exhaust flange has not come in yet so I will be
> attempting to start it with an open exhaust manifold. (-;
> >>>>
> >>>> Thanks Dean.  As to valve seating:   I had considered that, so I
> didn't adjust any valves that needed to have the clearance decreased. The
> only ones I adjusted were the ones where clearance needed to be increased.
> >>>>
> >>>> Already picked up the valve cover gasket so keep your fingers crossed!
> >>>>
> >>>> Spencer Yost
> >>>>
> >>>>> On Sep 20, 2017, at 1:39 AM, Tyler Juranek <tylerpolkaman at gmail.com>
> wrote:
> >>>>>
> >>>>> Hi Spencer,
> >>>>> First of all, congrats on getting the 430 unstuck! This is fantastic,
> >>>>> and I've really been enjoying the posts.
> >>>>> If you try to start it, is there any way that you could take a video
> >>>>> of the attempt?
> >>>>> I like to be able to hear things, being visually impaired.
> >>>>> If you can, that's awesome, if you can't, that's fine. Just reading
> >>>>> this is enjoyable. And while we're all watching you work on it, we
> >>>>> younger generation people (Although I think I might get the youngest
> >>>>> member trophy unfortunately) have been really getting a history
> lesson
> >>>>> to add to our education.
> >>>>> Good luck, and thanks for sharing!
> >>>>> Tyler Juranek
> >>>>> IA
> >>>>>
> >>>>>> On 9/19/17, Spencer Yost <yostsw at atis.net> wrote:
> >>>>>> I was able, over the last few days, to get the tractor completely
> ready for
> >>>>>> starting. I finished the valve adjustment, oil pan and gasket, the
> static
> >>>>>> timing, lubrication, and a few very minor repairs that I noticed
> need to be
> >>>>>> done. The wiring is not that great(i.e. no lights), but I have
> power to the
> >>>>>> ignition system, and that's all I care about right now. I'm still
> waiting on
> >>>>>> the valve cover gasket. But once I get that  I should be able to
> try to
> >>>>>> start it.
> >>>>>>
> >>>>>> Valve cover gasket should come in tomorrow, so maybe an update
> tomorrow
> >>>>>> night?.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> Spencer Yost
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> AT mailing list
> >>>>>> http://www.antique-tractor.com/mailman/listinfo/at
> >>>>> _______________________________________________
> >>>>> AT mailing list
> >>>>> http://www.antique-tractor.com/mailman/listinfo/at
> >>>> _______________________________________________
> >>>> AT mailing list
> >>>> http://www.antique-tractor.com/mailman/listinfo/at
> >>> _______________________________________________
> >>> AT mailing list
> >>> http://www.antique-tractor.com/mailman/listinfo/at
> >> _______________________________________________
> >> AT mailing list
> >> http://www.antique-tractor.com/mailman/listinfo/at
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>