[AT] Man, but the old ones are solid
Dean VP
deanvp at att.net
Mon May 29 15:15:35 PDT 2017
Dave,
There really isn't anywhere on the 620 within 2' of the gas cap other than on top of the hood itself. However, I would never do that and I don't think Dean would either. I agree that lifting a full gas can up 5' or more is very different than pouring from 5' feet but there is nowhere close to set the can unless a 5' stand was available. PS: I'll take your bet! 😊
Dean VP
Snohomish, WA 98290
It's better to be judged by 12 than carried by 6.
-----Original Message-----
From: at-bounces at lists.antique-tractor.com [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Dave
Sent: Monday, May 29, 2017 7:39 AM
To: Antique tractor email discussion group <at at lists.antique-tractor.com>
Subject: Re: [AT] Man, but the old ones are solid
Pouring liquid at 5’+ and lifting a can 5’+ are two very different things. Additionally, I’ll bet there is someplace to set the can down at, say, 4.5’ on the 620 and work it from there.
Dave
> On May 28, 2017, at 10:49 PM, Dean VP <deanvp at att.net> wrote:
>
> Dave/Dean,
>
> Unless that hose on it is 5 feet or more it won't really help filling
> the tank on a 620. As I recall the filler tube is over 5' or more
> above the ground on a 620. With only a 2' tube one would still have
> to lift the can at least 5'. Am I missing something?
>
> Dean VP
> Snohomish, WA 98290
>
> It's better to be judged by 12 than carried by 6.
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Dave
> Sent: Sunday, May 28, 2017 6:32 PM
> To: Antique tractor email discussion group
> <at at lists.antique-tractor.com>
> Subject: Re: [AT] Man, but the old ones are solid
>
> Hi Dean, This is the BEST tool I have ever found for lifting 5 gallons
> of gas or fule! See:
> http://www.northerntool.com/shop/tools/product_200407825_200407825
> <http://www.northerntool.com/shop/tools/product_200407825_200407825>
> Dave
>
>> On May 28, 2017, at 5:11 PM, Dean Vinson <dean at vinsonfarm.net> wrote:
>>
>> Looks to me like the gas cap and gasket etc are okay, and that fuel
>> stain
> is
>> a result of some prior circumstance before I bought the tractor. Today I
>> filled the tank all the way full then spent an hour or so brushhogging on
>> rolling, somewhat hilly land. No trace of any new fuel leakage.
>>
>> The stain may simply have been a case of the prior owner having difficulty
>> refueling the tractor. He only sold it because he wasn't able to climb
> up
>> on it anymore... while I kid about gas cans being heavier than they
>> were
> 30
>> years ago, he would likely have been thinking of 60 or 70 years ago.
>>
>> Good suggestion about the heavy-duty step stool or some such aid to
>> get up
> a
>> little higher while refueling. I'm plenty tall but couldn't hurt to be
> in
>> a little more advantageous position.
>>
>> Dean Vinson
>> St Paris, Ohio
>>
>>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Dean VP
>> Sent: Monday, May 22, 2017 12:48 AM
>> To: 'Antique tractor email discussion group'
>> <at at lists.antique-tractor.com>
>> Subject: Re: [AT] Man, but the old ones are solid
>>
>> Dean,
>>
>> Assuming there is leak at the gasket of the filler cap, the round donut
>> around the filler tube may be forcing the gas to dribble on the
>> outside of the hood. Kind of depends how tight the donut is around
>> the filler tube. I think I would do some testing to see if gas is
>> really leaking around the cap. Maybe wrap a cloth rag around the cap
>> and filler tube and check if it gets wet when bouncing around out in
>> the field. A full tank would enhance the test for leaks.
>>
>> BTW, I had to get the 620 out today to pull my JD 445 garden tractor
>> out of a mess in the pasture. I hadn't run it since last summer. Had
>> to put gas in as the tank was empty. It caused me to remember a trick
>> I use when lifting a
>> 5 gallon can up high enough to pour into the tank. I lay a wheel
>> that I use as a spare for my equipment trailer. It is really stable
>> lying flat on the ground and gives me another 8" or so of additional height.
>> Makes a real difference for me. However, if I remember right you are
>> not quite as tall as I am. But it might help. The part I like the
>> best is it is very stable. I store the spare wheel for the equipment
>> trailer in a room right next to where the 620 is stored so the wheel
>> is always handy . Anything that gives more height will help. Ladders
>> don't work for me. Maybe a heavy duty step stool would work but they
>> usually ae not built that heavy. Bottom line is adding something 8"
>> or more to stand on when lifting the 5 gallon can makes a huge difference.
>>
>> Dean VP
>> Snohomish, WA 98290
>>
>> It's better to be judged by 12 than carried by 6.
>>
>> <3600_620.jpg>_______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list