[AT] Man, but the old ones are solid

[Dave]

Hi Dean, This is the BEST tool I have ever found for lifting 5 gallons of gas or fule! See: http://www.northerntool.com/shop/tools/product_200407825_200407825 <http://www.northerntool.com/shop/tools/product_200407825_200407825>
	Dave

> On May 28, 2017, at 5:11 PM, Dean Vinson <dean at vinsonfarm.net> wrote:
> 
> Looks to me like the gas cap and gasket etc are okay, and that fuel stain is
> a result of some prior circumstance before I bought the tractor.   Today I
> filled the tank all the way full then spent an hour or so brushhogging on
> rolling, somewhat hilly land.   No trace of any new fuel leakage. 
> 
> The stain may simply have been a case of the prior owner having difficulty
> refueling the tractor.   He only sold it because he wasn't able to climb up
> on it anymore... while I kid about gas cans being heavier than they were 30
> years ago, he would likely have been thinking of 60 or 70 years ago.   
> 
> Good suggestion about the heavy-duty step stool or some such aid to get up a
> little higher while refueling.   I'm plenty tall but couldn't hurt to be in
> a little more advantageous position.
> 
> Dean Vinson
> St Paris, Ohio
> 
> 
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Dean VP
> Sent: Monday, May 22, 2017 12:48 AM
> To: 'Antique tractor email discussion group' <at at lists.antique-tractor.com>
> Subject: Re: [AT] Man, but the old ones are solid
> 
> Dean, 
> 
> Assuming there is leak at the gasket of the filler cap,   the round donut
> around the filler tube may be forcing the gas to dribble on the outside of
> the hood. Kind of depends how tight the donut is around the filler tube.  I
> think I would do some testing to see if gas is really leaking around the
> cap. Maybe wrap a cloth rag around the cap and filler tube and check if it
> gets wet when bouncing around out in the field. A full tank would enhance
> the test for leaks. 
> 
> BTW,  I had to get the 620 out today to pull my JD 445 garden tractor out of
> a mess in the pasture. I hadn't run it since last summer. Had to put gas in
> as the tank was empty. It caused me to remember a trick I use when lifting a
> 5 gallon can up high enough to pour into the tank.  I lay a wheel that I use
> as a spare for my equipment trailer. It is really stable lying flat on the
> ground and gives me another 8" or so of additional height. Makes a real
> difference for me. However, if I remember right you are not quite as tall as
> I am.  But it might help. The part I like the best is it is very stable.  I
> store the spare wheel for the equipment trailer in a room right next to
> where the 620 is stored so the wheel is always handy . Anything that gives
> more height will help. Ladders don't work for me. Maybe a heavy duty step
> stool would work but they usually ae not built that heavy. Bottom line is
> adding something 8" or more to stand on when lifting the 5 gallon can makes
> a huge difference. 
> 
> Dean VP
> Snohomish, WA 98290
> 
> It's better to be judged by 12 than carried by 6. 
> 
> <3600_620.jpg>_______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at