[AT] Tractor Tale

[Dave]

Here you go, Brad. You even have your choice of size and col(u)r. See: http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X.TRS5&_nkw=round+tuits&_sacat=0 <http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0.X.TRS5&_nkw=round+tuits&_sacat=0>
	Dave

> On Jan 27, 2017, at 9:06 AM, Gunnells, Bradley R <brad-gunnells at uiowa.edu> wrote:
> 
> You know....I bet a guy could make a pretty good living selling "round tuits".  [?]
> 
> 
> I know I'd buy some!
> 
> 
> Brad
> 
> ________________________________
> From: at-bounces at lists.antique-tractor.com <at-bounces at lists.antique-tractor.com> on behalf of Mike M <meulenms at gmx.com>
> Sent: Thursday, January 26, 2017 10:48:33 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Tractor Tale
> 
> Phil, push that poor old girl back in the garage, for shame. ;-)
> 
> Mike M
> 
> 
> On 1/26/2017 11:30 PM, pga2 at BasicISP.net wrote:
>> Sorta sounds like the '40 Allis B that sits in my driveway. It was running
>> and parked in a carport. I had to move it out to get a dead car out from
>> behind it and it never got put back in the carport. Then work got real busy
>> and it sat there too long and got water in the engine. Now it's stuck VERY
>> tight. I need to find a round tuit as well now that I'm retired. I also need
>> a round tuit to get the water pump replaced on my Allis RC.
>> Maybe someday soon.......
>> 
>> Phil in TX
>> 
>> --- jahaze at aol.com wrote:
>> 
>> From: Joe Hazewinkel <jahaze at aol.com>
>> To: at at lists.antique-tractor.com
>> Subject: [AT] Tractor Tale
>> Date: Thu, 26 Jan 2017 20:32:46 -0500
>> 
>> Hope this makes it to the list.  Am I the only one who has put a tractor in the shop, tore down the engine, then let it sit for 20 years only to forget why I brought it into the shop in the first place?
>> 
>> One of my first out of state purchases was an 18-27 Hart Parr on full steel.  I wanted to have one because I thought they looked cool.  I think it might have been stuck, so I stripped the engine down but couldn't get the pistons out (I really don't remember).  I know I rebuilt the head and all the parts I took off are sitting on the workbench next to it.  I put an old sheet over the motor to keep the dust off, seems like I might have put oil on top of the pistons, at least they are kind of oily.
>> 
>> Life took over, as well as another 30 tractors or so, so it is now tucked way back in the corner.  Fast forward to today, I needed an old sheet to put over the car seat to take the dog to the vet.  In a hurry, I pulled the sheet off of the old Hart Parr.  As I went to put it back tonight I figured I'd put a pipe wrench on the front crank and see what happens.  The motor rolled over and everything was free.  Now I don't remember if it was always that way, or if the oil did its job.  I'm confused, but I guess that comes with age.
>> 
>> Anyway, I guess I better start thinking about putting it back together soon, I'd love to hear it run before I forget it's there again.
>> 
>> Enjoy, Joe
>> 
>> Sent via mobile device
>> 
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
>> 
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
> 
> 
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at