[AT] Fork lift parts

[Spencer Yost]

I can't help but I love the picture!

Spencer Yost

> On Jan 21, 2017, at 4:37 PM, <rdhaskell at juno.com> <rdhaskell at juno.com> wrote:
> 
> Hi all.
> I broke the axle on my Hyster RT 150 fork lift.  To keep this on topic, I
> use it when working on my old engines and tractors.  This was made in the
> 50's and is powered by an IH Greendiamond 233 engine.  I was trying to
> push the forks under a three cylinder Hicks marine engine setting on
> dirt.  Dumped the clutch and bang, the drive shaft turned but I didn't
> move.  The axle has:  9459 A34 58662 H and a circle with IH stamped also.
> It is 37" long, with 16 splines that are 2.580" long and 1.815" in
> diameter.  The rest of the axle is 1.590" in diameter.  The flange is
> 6.250" in diameter and .3875 thick, with 6 holes for the securing studs
> to go through.  The holes are .500" and it has two 1/2 x13 threaded holes
> for jack bolts and weighs 22.5 lbs.
> I have found one for $375 plus about 10% tax, I thought this was a little
> much as I am cheap.  Does anyone on the list have one in their bone pile
> or know where I could find one at a better price. I was told shipping on
> something like this should be $35 to $40.
> Thanks.
> 
> Ron Haskell
> rdhaskell at juno.com
> Riverside, California USA
> https://plus.google.com/104862591013550196821/posts
> <Billboard..jpg>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at