[AT] JD 2020 standing still

Cecil Bearden crbearden at copper.net
Wed Apr 5 04:53:17 PDT 2017


Ray:

Check to see if there is a driveline fuse in that tractor. Massey had 
them, I am not familiar with your tractor.  If it is the fuse, it can be 
replaced without splitting.

Cecil in OKla


On 4/4/2017 6:13 PM, Ray Trimble wrote:
> I have my 2020 running but when in every gear and range and I release the clutch it doesn't move. I have jacked up the rear tire and removed the shifter plate so I can see the shaft from the clutch to the transmission. When I turn the rear tire this shaft does not move, but when the engine is running and clutch released the shaft does spin, so the clutch is working. My next step is to remove the rockshaft to see the transmission parts. At 72 I have never gone into a transmission, but It's my time now. What should I be looking at to see the problem? Hoping there is something not sliding that should be, but I'm  afraid a split of the tractor is coming.
>
>
> ThanksRay.
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list