[AT] no exhaust gasket?

[David Rotigel]

This stuff is not bad, John. See: http://www.autozone.com/sealants-glues-adhesives-and-tape/gasket-material/mr-gasket-6-x-24-x-1-16-in-ultra-seal-exhaust-gasket-material/193864_0_0/?checkfit=true <http://www.autozone.com/sealants-glues-adhesives-and-tape/gasket-material/mr-gasket-6-x-24-x-1-16-in-ultra-seal-exhaust-gasket-material/193864_0_0/?checkfit=true>
	Dave

> On Sep 5, 2016, at 9:49 PM, John Hall <jtchall at nc.rr.com> wrote:
> 
> Thanks for all the input guys, lots of great suggestions! I really like 
> the gaskets Cecil pointed me to. Plan now is to measure the bolt circle 
> and locate a gasket, flatten out and recheck the manifold as best as I 
> can. If I had time to pull the manifold and re-machine it I would and 
> try it with no gasket--but it's too close to harvest for that in case I 
> ran into trouble. I'll let you guys know how it turns out.
> 
> John
> 
> 
> On 9/4/2016 10:53 PM, Cecil Bearden wrote:
>> Try looking at this link:
>> 
>> https://www.holley.com/products/gaskets/collector_gaskets/
>> 
>> Cecil in OKla
>> 
>> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at