[AT] Weekend issues

[Richard Fink Sr]

Did you ever try Hickory for strength, if you can lift it

R Fink sr

pa


On 9/21/2016 11:04 AM, markagreer wrote:
> You want white oak and free of knots. You won't find a stronger wood.
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
> -------- Original message --------From: charlie hill <charliehill at embarqmail.com> Date: 9/20/16  5:45 PM  (GMT-05:00) To: Antique tractor email discussion group <at at lists.antique-tractor.com> Subject: Re: [AT] Weekend issues
> That will work better than pine if it's good quality oak.
> No knots, etc.
>
> Charlie
>
> -----Original Message-----
> From: Mike M
> Sent: Monday, September 19, 2016 3:46 PM
> To: Antique tractor email discussion group
> Subject: Re: [AT] Weekend issues
>
> I wonder how rough sawed oak would hold up? Find a local mill, and
> they'll cut it to whatever thickness you'd like. I bought some for a
> barn project from a local guy and it was surprisingly cheap for what I
> got. Sometimes if you take some odd sizes they can't get rid of you can
> get it really cheap.
>
> Mike M
>
>
> On 9/19/2016 1:42 AM, Dennis Johnson wrote:
>> All
>>
>> The last few days I have been hit with stupid little stuff.
>>
>> Borrowing my son's V10 Ram to haul some mowers to Okla. leaving 2 there
>> with someone and hauling my Hustler back after doing some mowing there.
>>     V10 failed an oil pressure sender Wednesday near Ennis Tx. Changed it
>> out in parts store parking lot, which was not fun on hot engine. This
>> morning on the way to church the replacement sender also failed, putting a
>> small stream of oil out the electrical connection, just like the first one
>> did. Got replacement under warranty, but went to 6 places looking for 1/8
>> NPT 45 elbow and could not find. Want to move sensor so I can get a wrench
>> or sender socket on it. Finally found short nipple and coupling that
>> should move it away from block slightly. Tomorrow morning will try to
>> install the second sensor when engine is cool before I start it.
>> Yesterday I snapped one of the blade spindle housings in two pieces on my
>> Hustler Fastrack SD mower. Was able to fine some replacement parts just
>> before store closed. Was able to finish mowing this afternoon.
>> This weekend the 2 X 10 ramps I use to load mower failed near a knot hole.
>> Friday I got a new 2 X 10, and it snapped in two pieces on Saturday.
>> Yesterday got a second replacement on that also.
>>
>>
>> Dennis
>>
>>
>> Sent from my iPad
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus