[AT] My MF135 at work

Richard Fink Sr rfinksr at verizon.net
Sun Sep 18 09:34:43 PDT 2016


Scott would it make any since to go in back wards, i know it would be a 
pain in the neck.

R Fink Sr

PA


On 9/17/2016 9:29 PM, Scott Williams wrote:
> I do keep an eye on the grill area, I know all the flyaway organic fluff can
> clog the intake, and I do keep an eye on the temp gauge.  Today I overdid
> it, and something punched a hole through the grill and into the radiator.
> Now I'll have to get that fixed or replace it.  I'm not just mowing the lawn
> here, though, so I'm not too surprised or upset.  This is rougher going than
> the video I posted, because I'm getting into more of the bushes and fallen
> trees (hence the punched radiator.)
>
> I'm getting to a point where I need to go in with my chainsaws and take out
> some of the smaller trees to open up the area around the pond, so I can get
> the tractor in between the bigger trees to do some clearing.
>
> Scott in Penfield NY
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Bo Hinch
> Sent: Saturday, September 17, 2016 10:51 AM
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Subject: Re: [AT] My MF135 at work
>
> Be sure and keep your radiator / grill clean . It is this kind of a job
> where you can ruin an engine pretty quick if not paying attention to you
> temp. gauge . Looks to me like you are doing one hell-of-a good job .
>
> On Fri, Sep 16, 2016 at 2:38 PM, <vschwartz1 at comcast.net> wrote:
>
>> Scott;
>> I have seen some tough mowing in my time but I have never done any
>> mowing that would even remotely compare to what you have accomplished
>> here. All I can say is that you and your little 135 done good. I was
>> going to tell you to watch your engine temperature gauge but I do not
>> think that it's necessary now.
>> I once pulled 6/16 inch bottoms plowing in a field in the Missouri
>> River bottoms. A field that had weeds so tall I could not see over
>> them standing on the Fender of an 856 International. We had to stop at
>> the end of each row to clean the bugs off the radiator. I thought that
>> was tough but it don't compare to what you just did.
>> Thank you for the video, I would have had trouble believing it.
>> Gil
>>
>> ----- Original Message -----
>>
>> From: "Scott Williams" <swillia5 at rochester.rr.com>
>> To: "Antique tractor email discussion group"
>> <at at lists.antique-tractor.com
>> Sent: Friday, September 16, 2016 1:47:34 PM
>> Subject: Re: [AT] My MF135 at work
>>
>> Here's a picture from last week looking towards the area where the
>> video was taken, no more tall grass and brush.
>>
>> Scott in Penfield NY
>>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Scott
>> Williams
>> Sent: Friday, September 16, 2016 2:29 PM
>> To: at at lists.antique-tractor.com
>> Subject: [AT] My MF135 at work
>>
>> A few weeks ago, I was so happy to finally have my tractor un-stuck
>> and clearing brush, so I took some video. You REALLY couldn't walk
>> through some of this terrain without a machete. Also, the "grass" was
>> so tall, that I would lose my sense of direction when I got into it,
>> and began to feel claustrophobic. Only the sound of the road let me know
> which way was out.
>> I have literally gone in circles out there before, trying to find a
>> "shortcut" to my stuck tractor.
>>
>>
>>
>> Let me apologize for the shaky camera work in this video. I have ET
>> (Essential Tremor) so my camera work is less than stellar. I could
>> probably have edited out half of it, but I don't have time or patience
>> for editing video these days, so I posted it as-is. The going got sort
>> of rough here and there, causing me to lose focus on the camera (and
>> annoyingly letting my finger drop into the frame here and there.)
>> After viewing it, I realized that the camera was looking where I was
>> looking - and that's not always where a viewer would want me to look.
>> I look down to see if I'm about to run over a rock, not up to see
>> where I'm going. So, when I watched the video, I kept "wishing" I'd
>> raise the camera to look at the path ahead. If you watch, you'll wish
>> that too, LOL. Also, when I took the video, I thought I had a piece of
>> wood stuck in the flail making a lot of noise.
>> Later inspection showed that a cotter pin had come out, and allowed
>> the flail knives to move out too far, hitting the housing (and making
>> NOISE.) I have since replaced all the cotters and knife holders with
>> bolts - when I did it I found that about half were missing the cotters.
> ROUGH MOWING!
>>
>>
>> Anyway, here's the link to the video. https://youtu.be/zzrjLiJ1aQU
>>
>>
>>
>> Scott in Penfield NY
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus




More information about the AT mailing list