[AT] chain sprocket

[John Hall]

Try this, scroll down to second page, left side.

http://www.rcweidmark.com/uploads/Combine%20Parts/Caisse%20IH/grainhandling.pdf

Also try here

http://www.abilenemachine.com/case-ih-combine-parts-elevator-chain-sprockets/

I looked up the part # here, had to use the old number not the supercede 
one--for heavens sake make sure I looked up the right machine and part!

http://partstore.caseih.com/us/parts-search.html#epc::mr60700ar827106

John




On 9/17/2016 9:00 PM, Greg Hass wrote:
> Does anyone know of a source for sprockets for the old No. 55 stamped
> steel chain; that's what we always called it, the kind you hammer the
> links apart, or maybe there is a different name. I googled it as stamped
> steel chain and all I got was hundreds of roller chain sprockets. The
> chain on the tailings elevator on my pull type IH No. 82 combine  came
> off at least 25 times last year. I was in a hurry to get the beans off
> and didn't pay attention but upon looking today it appears the top
> sprocket is worn and the chain just jumps the teeth. I have been running
> way behind due to a bad back and should have looked as the beans will be
> ready by the end of the week. I am thinking maybe the teeth could be
> built up but its getting a little late for that type of stuff; again my
> own fault. I do have a parts machine but with my back it would take an
> act of congress to get to it and remove the part, and even then I am not
> sure of the condition of the used part. Any leads would be welcome. I
> don't know if case IH has the part but I very much doubt it and being
> the weekend have no way to check on it.
>                         Greg Hass
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at