[AT] no exhaust gasket?

[Cecil Bearden]

John

I re-read your post and the 3 hole gasket is what you need.  Fel Pro 
used to have a board that had all their exhaust flange gaskets on it and 
you could match them up.  I have the remnants of one in my shop...

Try this 
link....http://catalog.remflex.com/BUICK_TURBO_UP_PIPE_GASKET_p/13-013.htm

You might search around and find something there.

Cecil in OKla


On 9/4/2016 8:08 AM, John Hall wrote:
> Not tractor but old combine. My Deere 3300 with a 219 gas engine has an
> exhaust leak. It is where the exhaust pipe attaches to the manifold.
> This is accomplished by means of a very heavy cast elbow bolted directly
> to the manifold with 3 bolts. There was no sign of any gasket. Me nor
> the parts guys at Deere can find a gasket in either the engine or the
> combine parts books. There best parts guy at the local store (I highly
> respect his ability) suggested there wasn't a gasket used. I cleaned and
> checked the surfaces and they are relatively flat, within .005" or so.
> What do you guys think about the no gasket used possibilty? I have a
> friend that used to do heavy truck repairs. He says NAPA has an exhaust
> sealer that is very tar like. He said they were able to seal some
> exhaust leaks with it--used it where the flare of the pipe clamped to
> the manifold. He also said some Chevrolets were put together with no
> exhaust manifold gasket--I think this was figured out by mechanics, not
> the factory. This is all new to me, Every exhaust I dealt with had a
> gasket. What do you guys think?
>
> John Hall
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at