[Farmall] real question

[John Hall]

Only thing I might add would be to get the gasket for the pump mounting 
as well as the one for the double line and its 2 o-rings. If the fluid 
hasn't been changed in a while you may want to drain the reservoir all 
the way and pull and wash out the filter--you'll need a gasket for that 
as well.

John Hall


On 11/21/2016 12:07 PM, E. John Puckett wrote:
> Depending on the model, it will have either a sel or an o-ring on the
> shaft that is worn.  The shaft may also be grooved, but if it is seal
> you can get a reddy sleeve.  If an o-ring using an abrasive buff in a
> Dremell tool to go around the shaft several times and smooth out the
> groove will usually take care of the wear problem.
>
>
> On 11/21/2016 10:45 AM, Bobby Guilbeau wrote:
>> Now that we know the list is still working and have everyone's attention....LOL
>>
>>
>> I have an AV that the hydraulic pump is leaking  fluid back into the crankcase.  What should I be looking for when I take the pump down to correct the issue?
>>
>> Bobby Guilbeau
>> Ranger
>>
>> Evangeline Area Council
>> Boy Scouts of America
>>
>> Mountain Bayou Lake Scout Camp
>> 1771 Mountain Bayou Road
>> Saint Landry, LA  71367
>> 337-461-2921 office/home
>> 337-278-9617 cell
>>
>>
>>
>>
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall
>>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall