[AT] Chrysler to SAE bell housing adapters

[Steve W.]

Cecil R Bearden wrote:
> I have decided to do something to the underpowered 2.3L in my sullair 
> compressor I use to blow off and sandblast my tractors and equipment.    
> The 2.3L was underpowered to start with.  I got the info from a Ford 
> industrial parts person with 35 yrs experience.   I have a slant 6-225 
> from an irrigation well on propane, and also a 460 Chrysler v-8 on 
> propane from a well.   I am looking for an adapter from the chrysler to 
> the SAE bell housing I don't know for sure what the bell housing number 
> is but there are adapters between the SAE numbers, I think I need a #3 
> or #4.  I have found soem GM ones, but not chrysler.....
> 
> Cecil in oKla
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at



http://www.phxgrp.com/transChrysler.htm

460 or 360 Chrysler?

Now if that truly is an M-460 Chrysler you have then you might need to 
look close at it. Those were actually Ford 460's that Chrysler bought to 
fill a gap in their engine line. It could have either bolt pattern on it.

-- 
Steve W.