[AT] Chrysler to SAE bell housing adapters

[Louis Spiegelberg]

I have a #2 SAE bellhousing that I know that bolts up to a Chrysler Industrial Flathead. I don't know if it will bolt to a slant 6 or not. It is for sale.

Lou Spiegelberg

Sent from my Verizon Wireless 4G LTE DROID

"Steve W." <swilliams268 at frontier.com> wrote:

>Cecil R Bearden wrote:
>> I have decided to do something to the underpowered 2.3L in my sullair 
>> compressor I use to blow off and sandblast my tractors and equipment.    
>> The 2.3L was underpowered to start with.  I got the info from a Ford 
>> industrial parts person with 35 yrs experience.   I have a slant 6-225 
>> from an irrigation well on propane, and also a 460 Chrysler v-8 on 
>> propane from a well.   I am looking for an adapter from the chrysler to 
>> the SAE bell housing I don't know for sure what the bell housing number 
>> is but there are adapters between the SAE numbers, I think I need a #3 
>> or #4.  I have found soem GM ones, but not chrysler.....
>> 
>> Cecil in oKla
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
>http://www.phxgrp.com/transChrysler.htm
>
>460 or 360 Chrysler?
>
>Now if that truly is an M-460 Chrysler you have then you might need to 
>look close at it. Those were actually Ford 460's that Chrysler bought to 
>fill a gap in their engine line. It could have either bolt pattern on it.
>
>-- 
>Steve W.
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at