[AT] Splicing into a 12V circuit

Rob Wilson ro.wilson at att.net
Wed Jan 13 07:55:15 PST 2016


Local AT&T no longer use standard scotchloks. They use a newer design that had the dielectric grease in them to insure no corrosion occurs. Since so much data is being pushed through twisted pairs they can't afford to create problems using older types of terminations.
Rob

On Jan 13, 2016, at 9:22 AM, Bo Hinch <bohinch at gmail.com> wrote:

My two cents worth . when I make a splice and can`t solder , I use
Dielectric grease . Seals and protects for years down the road . A small
tube from parts house will last for years .

> On Wed, Jan 13, 2016 at 7:13 AM, Stephen Offiler <soffiler at gmail.com> wrote:
> 
> Telco wiring doesn't vibrate, is typically enclosed in a junction box, the
> Scotchlok type you mention has a sealant, and the voltages and currents are
> all quite different from a tractor headlight application.  Again, a good
> automotive, truck, or heavy equipment technician won't use Scotchlok, but
> they will use seal-able crimp connectors.
> 
> SO
> 
> 
> On Wed, Jan 13, 2016 at 7:54 AM, charlie hill <charliehill at embarqmail.com>
> wrote:
> 
>> The phone company here has been using Scotchlok fasteners
>> for as long as I can remember.   They use them anywhere but
>> direct burial and they have some sort of fastener inside
>> a plastic sleeve with a sealant inside for that.   When I had buddies
>> working for the telco I always had a supply of scotchloks around.
>> In fact I think I still have a few.  Never had a problem with them.
>> 
>> Charlie
>> 
>> -----Original Message-----
>> From: Stephen Offiler
>> Sent: Wednesday, January 13, 2016 7:00 AM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] Splicing into a 12V circuit
>> 
>> Mike:
>> 
>> The professionals don't solder.  They use crimp connectors, and VERY
>> important, they type that has heat-shrink jackets.  They make a solid
>> electrical connection when crimped properly, and they seal out the
>> environment permanently.  Look around the 'Net; they're all over the
>> place.  I am NOT a fan of those Scotchlok things that Spencer mentioned
>> (Sorry Spencer!)
>> 
>> 
>> Steve O.
>> 
>> 
>>> On Tue, Jan 12, 2016 at 5:01 PM, Mike M <meulenms at gmx.com> wrote:
>>> 
>>> Hi All,
>>> I bought some LED lights to augment the dim OEM lights that came on my
>>> tractor. What I'd like to do, is tie into the "bright" light circuit so
>>> when I turn the bright lights on they all come on, yet I can still run
>>> down the road with the normal lights on without blinding people. I
> think
>>> it was John Hall that added LED's to his tractor or combine, and I was
>>> wondering the best way to tap into the circuit. Generally I like to
>>> solder, but admittedly my soldering skills suck. Any thoughts would be
>>> appreciated.
>>> 
>>> Thanks,
>>> Mike M
>>> 
>>> 
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>> 
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>> 
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
> 
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at




More information about the AT mailing list