[AT] broke hose

[Dennis Johnson]

Ron,

The short hose split.
The bent tubes are welded into the block. These tubes have the hose barb on the other end, where the hose is crimped.
Will try a hydraulic shop to see what they can do. Some are picky about just crimping there brand of hose and fittings. Hopefully they can match this bent tube.

Thanks
Dennis


Sent from my iPad

> On Nov 15, 2015, at 9:25 PM, rdhaskell at juno.com wrote:
> 
> Hi Dennis.
> The picture is small and can't tell everything.  Looks like the hose on
> the left is the problem and is connected to the steel line with some kind
> of fitting.  Does it screw on or is it sledged?  Either way unscrew it or
> grind it off, I am sure a hydraulic shop can put another one on.  On the
> other end the fittings should screw apart and go on the new hose.
> 
> Ron Haskell
> rdhaskell at juno.com
> Riverside, California USA
> http://picasaweb.google.com/RonHaskell
> 
> On Sun, 15 Nov 2015 19:29:17 -0600 Dennis Johnson
> <moscowengnr at outlook.com> writes:
>> I was using the loader on my IH 2504 tractor and popped a hose.The 
>> issue is that the hose is crimped to some steel fittings welded to a 
>> mounting block. It lines are for the bucket tip function on the 
>> loader.
>> Any ideas on how to get it fixed. I am sure one option is a dealer. 
>> Any other ideas??
>> 
>> Dennis
>> 
>> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at