[AT] Getting water out of a gearbox

Mike meulenms at gmx.com
Mon Jun 1 11:04:10 PDT 2015


It's an HR7, what I'm running into is the fact that they are not made 
anymore.

Mike M


On 6/1/2015 1:52 PM, Dean VP wrote:
> Mike,
>
> What is the model # of your Howard Rotavator?
>
> Dean VP
> Snohomish, WA 98290
>
> "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent
> virtue is the equal sharing of misery."  . Sir Winston Churchill
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
> Mike
> Sent: Sunday, May 31, 2015 5:21 PM
> To: ATIS
> Subject: [AT] Getting water out of a gearbox
>
> So I bought a used Howard Rotavator over the winter, and am going
> through it so a friend can borrow it to till up his garden.  When I
> checked the gearbox oil, it was a nasty color, and way overfilled. After
> pumping what I could of the old stuff out, I found out why it was so
> full, water.  There is no drain plug for the gearbox and no cover that
> can be taken off to access the inside. What would be the best way to get
> all the moisture out of the gearbox. Thanks for any input.
>
> Mike M
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>




More information about the AT mailing list