[AT] Tractor OEM filters

Mike meulenms at gmx.com
Sun Jul 26 17:50:36 PDT 2015


I could understand if it was for the large hydraulic filter, but for an 
engine oil filter that is just highway robbery. Do any place measure and 
match filters by size and thread type?

Mike M


On 7/26/2015 8:12 PM, jtchall at nc.rr.com wrote:
> Case IH just burnt me close to $20 for an oil filter for a 1972 454 gas.
> It'll be Napa from now on.
> Kawasaki charged me  about $11 for one to fit a Mule--I bought it since I
> was already there .
> Deere charges about $6 for the one to fit my combine.
>
> I do splurge for my wife's car. She has been driving Chrysler products with
> Mitsubishi engines for about 15 years. They are prone to lifters clicking on
> crankup. I started using high performance filters and the problem went away.
> Switched back to regular and the problem came back. Can't explain it other
> than there must be some small passages that get plugged. The high
> performance filters weigh about 2-3 times what a normal filter does, so its
> more to it than a fancy set of graphics and a different box. They cost about
> $13.
>
> John Hall
>
>
> -----Original Message-----
> From: Mike
> Sent: Sunday, July 26, 2015 7:34 PM
> To: ATIS
> Subject: [AT] Tractor OEM filters
>
> OK, so a few months back I bought a Mahindra 4035 to replace an aging
> Massey 255. So far I love it; it sips fuel, and best of all, I'm not
> working on it all the time. The OEM recommends changing the original oil
> at 50 hours, then every 200 after that. So I called the dealer I bought
> the tractor from to see if they had a filter in stock, they did, for the
> bargain price of $27!!!!!!!!!! I mean come on, it looks like a regular
> filter nothing special. I can't believe Mahindra designed their own
> filter when there are thousands of ones already in production. Evil
> Dave, have you had any similar issues with your new Kubota? Any thoughts
> on how to cross this filter? I've tried to cross the OEM number with
> Wix, Baldwin, Donaldson, NAPA, all with no success.
>
> Thanks,
> Mike M
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>




More information about the AT mailing list