[AT] Second cutting

[Spencer Yost]

The male alpacas are enjoying a banquet of fresh cut hay while the 861D takes a breather.

The new mower did very well with cutting but I had a lot of trouble with drafting.  It was very hard to keep the height correct. If I extend the cylinder there is simply too much weight on the head.  I created way too many dirt gouges.

And of course like any new piece of equipment it took a little while to get used to. It always takes a time or two before you get the spacing between the tractor and mower absolutely correct 100% of the time.

All in all I'm pretty pleased with the mower.   Pictures are below.

Spencer



-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 176642 bytes
Desc: not available
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20150725/3df656c5/attachment.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.jpeg
Type: image/jpeg
Size: 129430 bytes
Desc: not available
URL: <http://lists.antique-tractor.com/pipermail/at-antique-tractor.com/attachments/20150725/3df656c5/attachment-0001.jpeg>
-------------- next part --------------