[Farmall] H water pump pulley

[jtchall at nc.rr.com]

Saw them in McMaster Carr. I can see them having limited use. I just changed 
the pin on the steering post on dad's M that holds the steering shaft 
bearing block/throttle etc. It was really worn and loose. I remember it had 
a head on it but don't remember if it had a cotter pin (I replaced it with 
one that does). I'm wondering was that a grooved pin?

John Hall

-----Original Message----- 
From: szabelsk at gdls.com
Sent: Thursday, February 26, 2015 9:17 AM
To: Farmall/IHC mailing list
Subject: Re: [Farmall] H water pump pulley

These types of pins have been around since the early 1920's. They're still
in use and come in a whole range of designs, some with single grooves,
some multiple grooves. The grooves can also be in the middle of the pin
instead of on one end. I believe there are also types that have a cap that
doesn't go into the hole, sort of like a rivet. If you do a search of the
internet for grooved pins, you should be able to find multiple suppliers
and see all the types available.


Carl Szabelski


The Borg Are Wrong, Resistance Is Not Futile ..... It's Voltage / Current
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall